Uniview 4MP explosion-proof PTZ dome 33x zoom ATEX
Explosion-proof PTZ camera in 316L stainless steel with 33x optical zoom, ATEX certification, intelligent analytics and monitoring of hazardous areas
- ATEX and IECEx certified for explosive environments
- 4MP resolution with 33x optical zoom
- 316L stainless steel for corrosive environments
- PTZ function with 360° rotation
- Automatic tracking of people and vehicles
- Intelligent detection of people, vehicles and non-motorized vehicles
- People counting and people density monitoring
- Wise ISP technology for low light
- 120 dB WDR
- MicroSD card support up to 512 GB
- Alarm inputs and outputs
- Audio input and output
- Two-way audio
- PoE+ or 230V operation
- IP68 and NEMA 4X rated
This camera is developed for surveillance in areas where ordinary cameras are not permitted due to the risk of explosive gases, vapors or dust. The camera is ATEX certified and can therefore be installed in many types of industrial environments such as refineries, chemical plants, offshore installations, energy facilities, tank farms and production areas.
| Technical specifications | |
| Product type | 4 MP Wise-ISP Intelligent Explosion-Proof Network Dome Camera |
| Explosion protection | 316L stainless steel housing ATEX: Ex II 2GD Ex db IIC T6 Gb / Ex tb IIIC T80°C Db IECEx: Ex db IIC T6 Gb / Ex tb IIIC T80°C Db |
| Image sensor | 1/2.7" CMOS |
| Maximum resolution | 4 MP |
| Lens | 4.5 to 148.5 mm motorized lens 33× optical zoom Aperture: F1.5 to F4.0 |
| Field of view | Horizontal: 53.6° to 2.68° Vertical: 31.7° to 1.51° Diagonal: 65.9° to 3.20° |
| DORI distance | Detect: 105.8 m to 3172.5 m Observe: 42.3 m to 1269.0 m Recognize: 21.2 m to 634.5 m Identify: 10.6 m to 317.3 m |
| Wide Dynamic Range | 120 dB WDR |
| Video streams | Five simultaneous streams |
| Video resolution | Main stream: 2688 × 1520 @ 30 fps Sub stream: 1920 × 1080 @ 30 fps Third, fourth and fifth stream: 720 × 576 @ 30 fps |
| Video compression | Ultra 265 H.265 H.264 MJPEG |
| Video bitrate | 128 Kbps to 16 Mbps |
| Image functions | 2D/3D DNR Digital defog BLC HLC DIS image stabilization ROI support U-code support White balance adjustment |
| Smart intrusion prevention | Line crossing detection Intrusion detection Enter area detection Leave area detection Classification of humans, non-motor vehicles and vehicles |
| Auto tracking | Supported |
| People counting | People flow counting and crowd density monitoring |
| PTZ functions | 360° endless pan Tilt: +90° to 0° 1024 presets 16 patrol routes 3D positioning Home position Patrol recording |
| Pan/Tilt speed | Pan: 0.1°/s to 240°/s Tilt: 0.1°/s to 120°/s |
| Audio | Two-way audio G.711U, G.711A compression Audio suppression supported 8 kHz and 16 kHz sampling rate |
| Audio interfaces | 1 audio input 1 audio output |
| Alarm interfaces | 2 alarm inputs 1 alarm output |
| Network interface | 1 × RJ45 10/100 Mbps Ethernet |
| Serial interface | 1 × RS485 |
| Protocols | IPv4, IPv6, HTTP, HTTPS, RTSP, RTP, RTCP, RTMP, TCP, UDP, DHCP, PPPoE, DNS, DDNS, NTP, SMTP, SNMP, QoS, SSH, SSL/TLS, 802.1X, UPnP and more |
| Integration | ONVIF Profile S, G, T and M SDK support |
| Users | Up to 32 users Administrator, operator and user levels |
| Storage | MicroSD card up to 512 GB ANR NAS (NFS) |
| Power supply | AC 100 to 240 V PoE 802.3at |
| Power consumption | 17 W |
| Protection rating | IP68 NEMA 4X |
| Surge protection | 6 kV |
| Dimensions | Ø197.4 × 275.0 mm |
| Weight | 7.34 kg |
| Operating conditions | -40°C to +60°C Humidity up to 95% RH, non-condensing |
| Certifications | ATEX IECEx CE EMC CE LVD FCC RoHS WEEE |
| NDAA compliant | Yes |
| Der tages forbehold for eventuelle fejl og ændringer i specifikationerne / Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.
ATEX certified for explosive environments
The camera is approved for installation in explosive atmospheres and is certified according to both ATEX and IECEx standards.
This means the camera is designed to prevent electrical components from igniting explosive gases or dust in the surroundings.
That makes the camera suitable for industrial areas where safety requirements are significantly higher than for ordinary video surveillance.
316L stainless steel
The camera housing is made of 316L stainless steel.
The material is often used in maritime environments, offshore installations and chemical plants where equipment is exposed to moisture, salt, chemicals or other corrosive influences.
It ensures a long service life even under demanding conditions.
33x optical zoom
The camera is equipped with a motorized zoom lens of 4.5 to 148.5 mm, providing 33x optical zoom.
This allows you to monitor both large areas and details at long distance without loss of image quality.
At maximum zoom the camera can identify people at several hundred meters under the right conditions.
PTZ with 360° coverage
The camera can rotate infinitely 360° and can be controlled both manually and automatically.
This makes it possible to follow incidents, patrol fixed routes or focus on specific areas as needed.
The camera supports up to 1024 presets and 16 patrols.
Automatic tracking
The camera supports Auto Tracking.
That means the camera can automatically follow people or vehicles when they are detected in the surveillance area.
The feature can be an advantage in large areas where the operator is not constantly monitoring the camera manually.
Intelligent detection of people and vehicles
The camera supports intelligent analytics with classification of people, vehicles and non-motorized vehicles.
You can set up rules such as:
- Line crossing
- Intrusion into area
- Entry into area
- Exit from area
This reduces the number of irrelevant events compared to ordinary motion detection.
People counting and area analysis
The camera supports people counting and monitoring of people density.
This makes it possible to detect how many people pass through an area or remain within specific zones.
The feature can be used for security, statistics and capacity management.
Wise ISP improves low-light images
The camera is equipped with Wise ISP image processing and a high-sensitivity sensor.
That helps the camera make better use of available light and delivers more detailed images in challenging lighting conditions.
It makes the camera suitable for surveillance in dark industrial areas and outdoor installations.
120 dB WDR
With 120 dB WDR the camera can handle large differences between bright and dark areas in the same image.
This is especially useful at gates, entrances, storage areas and installations with strong backlight.
Two-way audio and integration
The camera supports both audio input and audio output as well as two-way audio.
This allows connection of external microphones and speakers or direct communication with people in the area.
In addition, there are both alarm inputs and alarm outputs for integration with other security systems.
Can be used with or without a recorder
The camera supports microSD cards up to 512 GB and can therefore store recordings directly in the camera.
We generally recommend using a recorder together with the camera. A recorder provides longer storage time, centralized management of multiple cameras and easier searching of recordings.
PoE+ or 230V power
The camera can be powered either via PoE+ (802.3at) or conventional 230V AC.
This gives more options during installation depending on the site's infrastructure.
Built for extreme environments
With IP68 rating, NEMA 4X certification and an operating temperature from -40°C to 60°C, the camera is developed for demanding industrial environments.
It can be used both indoors and outdoors year-round.
Key technical points
- 4MP resolution, 2688 × 1520
- 1/2.7" CMOS sensor
- 33x optical zoom
- 4.5 to 148.5 mm motorized lens
- 360° PTZ rotation
- Auto Tracking
- Wise ISP technology
- 120 dB WDR
- People counting
- People density monitoring
- Person, vehicle and bicycle classification
- MicroSD up to 512 GB
- Alarm 2 in / 1 out
- Audio 1 in / 1 out
- Two-way audio
- RS485 interface
- Five video streams
- PoE+ (802.3at) or AC220V
- IP68 rated
- NEMA 4X certified
- ATEX and IECEx certified
- 316L stainless steel
- Operating temperature from -40°C to 60°C
- Max. power consumption 17W
- NDAA compliant
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.