facebook

The Jablotron JA-100 series is one of the most intuitive and complete alarm systems that combine advanced technology and high security with user-friendly operation and beautiful design.

With one of Denmark's best-selling alarm systems, both in the home and business, you can feel completely safe. The alarm, which has a modular structure, embraces all the functions and options that the owner of a burglar alarm could wish for. Among the most used functions can be mentioned anti-theft, automation, access control, signal and value readings, smart home integration etc.

Since Jablotron is a professional European brand that is used by the largest authorized alarm installers in Denmark and the rest of Europe, it also requires less training to program, which is why all our packages are made so that they include setup. You therefore just have to turn things up, and we will do the programming together.

Login or create use r to see prices.

 

Model: JA-123E

The JA-123E is an outdoor keyboard with RFID / bypass, and part of the JA-100 series. With the bypass switch you can activate a PG output, which allows for things like door control or start of entry time. If desired, it can also be programmed to act as the system area connector.

Also available as PROX reader without keyboard: JA-122 E

Technical specifications
Supply voltage 12 V (9 -15 V) from the control panel digital bus
Stand-by consumption typically 15 mA
Enclosure class IP65
Mechanical strength EN 50102 IK08
RFID frequency 125 kHz
RFID card RFID card JABLOTRON 100 and EM Unique 125kHz
Dimensions 46 x 151.5 x 22.5 mm
Cable length 3 m
Operating temperature range -25 to +60 ° C
Operating environment EN 50131-1 IV. Outdoors in general
Model: JA-114E

JA-114E is a control panel used to control the system. The panel has both LCD, keyboard and built-in PROX reader and one control panel is included, but it is actually possible to expand the control panel by up to control panels (JA-192E). With the help of the control panels, it is quite simple to control the alarm. The control panel is both supplied and communicates through a BUS cable. The unit has a built-in sleep time, which reduces the load on the control panel, where it otherwise takes up one space. PG outputs, log events, zones and areas can be controlled via the panel menu.

Please note that the JA-114E is not compatible with JA-100kx control panels.

 

Technical specifications

Voltage via the control panel'S BUS 12 V (9 - 15 V)
Power consumption standby 15 mA
Each additional control segment 0.5 mA
RFID frequency 125 KHz
Size 102 x 128 x 33 mm
Operating temperature -10 to 40 ° C
Indoor environment according to EN 50131-1, EN 50131-3: II
Model: JA-110P

JA-110P 110 ° / 12 m is a BUS detector that is activated by human body heat. Jablotron lenses: JS-7904, JS-7906 and JS-7901, are compatible with the device and can be used if you want to optimize the detection.

It is possible to choose between two levels of immunity to false alarms. In addition, the device has SMARTMEMORY, an optional feature that provides LED indication of activated detector.

Technical specifications

excitement Via central bus BUS 12 V (9 –15 V)
Standby consumption 5 mA
Mounting height 2.5 m above the floor
Coverage 110 ° / 12 m (with standard lens)
Dimensions 97 × 60 × 52 mm
Operating temperature -10 ° C to 40 ° C
Installation environment Indoors
Model: JA-120PC

JA-120PC is a BUS PHOTOPIR detector from Jablotron. It can detect human movement, in building or premises, and confirm alarm with a picture, taken in colors. In addition, the detector can also take a picture in the event that a PG output is activated, ie in the event of water damage or fire.

The image is taken first in low resolution (320x240 pixels) and then in high resolution (640 × 480 pixels). If it is dark, the camera uses the built-in flash. The images are stored on the detector's internal micro SD card and the low-resolution image is then sent on to the control panel. From here it can be forwarded to an external server, user or KC.

If you want to see the pictures, F-Link or J-Link can be used. They can be found in the event log in low resolution, but if you click on details you can find the image in higher resolution.
In addition, you also have the option of having the image sent to you directly from MyJablotron web self-service.

The detector can also be set up to take a pre-alarm picture, whereby it can send a picture either at input time or while only one alarm has gone off.

Immunity to false alarms can be set to two levels. Either rapid reaction + basic immunity, or slower reaction + higher immunity.

Technical specifications

excitement via central BUS: 12 V (9 to 15 V)
Coverage PIR 55 ° / 12 m (with standard lens)
Mode of operation Passive infrared
Memory Micro SD
SD card size 1GB to 2GB
Operating temperature -10 ° C to + 40 ° C
Dimensions 60 x 110 x 55 mm
Installation environment Indoors
Model: JA-159P

JA-159P is specially designed to be located outdoors. The detector has two built-in PIR elements, both of which must be activated simultaneously to sound the alarm, ie what is called double activation. The double activation ensures a high degree of immunity to false alarms, which is important in an outdoor environment where disturbing elements can occur, such as small animals. The detector is from Optex, but its transmitter is developed by Jablotron. The detector must use two CR123 batteries. In addition, it has both anti-mask function and has anti-tamper alarm built-in. Anti-mask, in case something tries to cover the detector, and anti-sabotage ensures that the detector cannot be taken down or opened without sending a tamper alert. In addition, the detector performs continuous tests, and notifies if something is wrong.

If you want to increase the range, it is possible with Jablotron's 3-pin external antenna.

Note that the module is addressable and takes up one space in the control panel.

Technical specifications
excitement 2 x (3 x) Lithium batteries, type CR123A (3 V / 1.4mAh)
Battery life 2 x 3.6 V up to 3 years / 3 x 3.6 V up to 4 years (120 s)
Range Up to 300 m - open terrain
Frequency 868.1 MHz, Jablotron 100 protocol
Mounting height 0.8 - 1.2 m
Coverage area 12 m / 90 °
Object's speed of movement 0.3 - 1.5 m / s
Battery saving hours Adjustable 5 sec or 120 sec
Max. humidity 95%
Operating temperature -20 ° C to + 60 ° C
Dimensions 186 x 71.3 x 105.5 mm
IP Class IP55
Installation environment Outdoor
Model: JA-111A-BASE-RB

Jablotron JA-111A base for BUS outdoor siren

  • Emits sound in case of alarm, chirp sound and PG activation or deactivation.
  • The lid is available in white plastic, grey plastic or brushed steel. All with red strobe.
  • Note - A backup battery is required - Backup battery and lid are purchased separately

The siren communicates and is powered through the control panel's BUS and has both a built-in battery and spirit level. In the event of a power failure, the siren goes into power saving mode.
The device is addressable and takes up space in the control panel.

Model: JA-1X1A-C-WH

JA-1X1A-C-WH is a white plastic lid, with red strobe that fits Jablotron's JA-111A, JA-151A and JA-163A.

Technical specifications

Color White
The color of the signal mask Red
Weight 0.67 kg
Dimensions 200 x 300 x 61 mm
Model: JA-111ST-A BUS

JA-111ST-A detects fire hazard indoors. It can be used both for residential and commercial purposes. In addition, it is possible to install it in caravans, motorhomes and caravans. However, it is not applicable in industrial environments. The detector is made to also be able to activate other JA-151ST-A or JA-111ST-A detectors in the installation, and then it also acts as a siren for the alarm. It can also operate independently, in case of lost connection, as long as it is equipped with backup batteries. The unit can be set to detect smoke AND heat, smoke OR heat, ONLY smoke or ONLY heat. This is possible because it consists of two individual detectors. A heat detector and an optical smoke detector - which detect a change in light reflection in its built-in smoke chamber. It also has a built-in light sensor that can be used for test signal. The unit sends both a signal to the alarm center and warns locally.

Note that the detector takes up one space in the system.

Technical specifications
Supply voltage 9 - 15 V DC / 3.5 mA (150 mA during an alarm)
Back-up supply 3x alkaline batteries AA 1.5 V or 3 x lithium batteries (AA) 1.5 V
Smoke detection Optical light scattering
Smoke detector sensitivity m = 0.11 ÷ 0.13 dB / m
Temperature detection Class A1
Alarm temperature 60 ° C to 65 ° C
Operating temperature -10 ° C to 70 ° C
Dimensions diameter 126 mm, height 52 mm, 150g
Installation environment Indoors
Model: JA-114HN

JA-114HN is a BUS module with 4 inputs and outputs, which can be used, for example, to take over wireless alarm systems where you choose to keep the old detectors. However, the module can also control devices through the PG outputs. The unit has a secondary power supply that is capable of supplying voltage to relays connected to the signal output. In addition, it has adjustable EOL resistance values and the ability to adjust the resistance values of the inputs. The module's PG outputs are galvanically separated and share two common C-terminals. The module is equipped with tamper switch in front and rear, and works excellently in interaction with fog generators.

Please note that the module is compatible with F-Link 1.4.0 or later, and that the module occupies four slots in the control panel.

Technical specifications

Voltage via the control panel'S BUS 12 V (9 - 15 V)
Standby consumption 10 mA + device consumption
Max. continuously Max. + U GND 200mA
Max. switch-on load 500mA / 38 V
Maximum resistance on inputs Maximum resistance on inputs
Cable length from module to units Max. 100 m
Operating temperature -10 to 40 ° C
Size 77 x 40 x 31 mm
Weight 26 g
Also complies EN 50130-4, EN 55022
Model: JA-112I

JA-112I is an indicator, made to show area status or PG activation (1-128). It does so by illuminating with its red LED lamp. The indicator is connected to the control panel via BUS cable.

Note that the device is not addressable and does not take up any space in the control panel.

Technical specifications
excitement from the control panel BUS: 12 V (9 ... 15 V)
Power consumption in standby mode: (LED on / off) 6 mA / 3 mA
Power consumption with cable 6 mA
Dimensions 62 x 36 x 27 mm
Operating temperature 10 ° C to + 40 ° C
Installation environment Indoors
Model: JA-110Z-C

JA-110Z-C can divide the system BUS into several branches. The print is square, has straight terminal blocks and a small hole. It is possible to mount it in a JA-190PL.

Technical specifications
Maximum voltage AC 42 V
Maximum voltage DC 60 V
Maximum current 2 A
Model: JA-194PL

JA-194PL is a multi installation box.

The installation box is designed for Jablotron modules and then it has an anti-tamper switch both in front and behind. The box is suitable for input modules, output modules, terminal modules, hubs and others.

Technical specifications

Dimensions 182 x 132 x 45 mm
Temperature range -10 ° C to + 40 °
Model: AN-868

AN-868-3PIN is an external antenna that can enhance the 868 MHz signal to devices. The antenna has connectors such as AN-01A, which means that it can be used for control panels, control panels, outdoor sirens and expansion modules.

The device has excellent transmission characteristics, as it is designed based on the special PIFA design, which is also found in the latest mobile phones. In addition, it has tamper detection if the power supply is short-circuited or disconnected. However, the function must necessarily be supported by the connected device. The antenna can be used both outside and inside.

With its 3-pin connector, it can be used with the latest developed JABLOTRON 100 devices.

It is also compatible with JA-150 EM-DIN wireless module, for monitoring power consumption.

Technical specifications

Frequency 868 MHz
Antenna strength improvement up to 3 dBi
Resistance 50ohm
Cable length 2 m
Operating temperature -20 ° C to + 60 ° C
Installation environment Indoors and outdoors
Model: Jablotron klistermærker

Alarm sign intended for interior installation on glass sections. The sign measures 80x50mm.

Model: BAT-3V6-170

NiCd battery, suitable for JA-150A.

Technical specifications
Battery type 3.6V 3x2 / 3AAA 170mAh
Dimensions 32x31x11mm

Model: BAT-3V2-CR2

Backup battery that can be used for JA-110A II, JA-150A II and JA-152A.

Model: JA-121E

Outdoor keyboard with RFID/Mifare/BUS Touch Area Operation.

Model: JA-101KR-LAN/3G
  • Up to 50 wired BUS / wireless devices
  • Up to 50 unique user codes
  • Up to 8 areas
  • Up to 16 programmable PG outputs
To Top