Bosch NPD-5001-POE PoE injector 15W
Bosch 15W PoE injector for most common Bosch cameras
- Ordinary poE
- It fits most common cameras
- On the camera page, under the data sheet, you can see how many Watts the camera uses
| Download | |
| Datasheet | Quick Guide |
| Dimensions (H x W x D) (mm) | 33 x 53 x 140 mm |
| Ethernet type | 10/100/1000BASE-T |
| Input voltage (VAC) | 100 – 240 VAC |
| Operating temperature (°C) | 0 – 40 °C |
| Storage temperature (°C) | -20 – 70 °C |
There is no reviews yet. Be the first to write us your opinion
Bosch PoE injector
Can be used for cameras that need extra power on PoE, such as The PTZ cameras and the Mic series
Easy installation
The PoE injector is easy to install. It is plugged into a socket and then a network cable is connected from it to the camera to supply it with PoE.
A network cable is also drawn from the PoE injector to either the router or recorder.
Suitable for
The injector is suitable for ordinary cameras that do not require so much power
Here are some examples
Flexidome IP 3000i/4000i/5000i series : The series contains various models (dome cameras) with low power consumption, typically below 15W.
DINION IP 3000/4000/5000 series : The series contains various models, with low power consumption, typically below 15W.
IP 2000 series : Bosch IP 2000 cameras are small and designed for indoor use, typically using less than 15W.
AUTODOME IP 4000i/5000i series (smaller models only): Although some PTZ cameras require more power, some models in this series have a power consumption of less than 15W
On the camera's own page, under the data sheet, you can see how much power the camera uses
