UPS backup power for 19'' Rack - 1200 W
Backup for power outages - keeps your surveillance running when the power is cut
- High capacity 1200 W / 2000 VA
- Approx. 4 hours runtime on a small system with 4 cameras and a recorder
- Can be mounted in a 19" rack / 3U
- Automatically switches to battery power during an outage without the system shutting down
- Automatically recharges when mains power returns
- Built-in display and lots of smart features
In short: A UPS is a battery backup system that provides security, stability and continuity for your video surveillance.
There is no reviews yet. Be the first to write us your opinion
'Backup battery' of 1,200 Watts that can be mounted in a 19'' rack cabinet
It is mounted in the rack cabinet alongside your other equipment and provides backup power to the devices connected to it if the mains fails.
line-interactive technology
It monitors the mains voltage, frequency and phase angle and, if fluctuations or disturbances are detected, the system automatically adjusts the voltage and filters electrical noise before power is passed on to the other devices.
In case of power failure
When the mains fails the UPS switches to battery operation immediately, with no noticeable delay.
Built-in Display
It shows current information about voltage, frequency, battery capacity and load.
Control the unit from your PC
The UPS comes with a program called UPSmart, which lets you connect a PC via USB to monitor and control its operating status.
- See how much charge is left on the battery
- See how high the load is
- See if there are errors or events
- Set automatic shutdown of equipment during a power outage
Key features
- Line-interactive UPS with AVR voltage regulation
- Automatic switch to battery operation during power failure (typical < 7 ms)
- Compatible with APFC power supplies and generators
- LCD display and audible alarms for operational status
- Built-in noise and surge filter
- Management via USB and UPSmart software
- Cold-start function and automatic restart after power failure
Specifications
- Rated power 1200 W / 2000 VA
- Input voltage 230 V AC ± 25 %
- Input frequency 50 / 60 Hz (auto-detection)
- Output voltage 230 V AC ± 10 % (approximate sine wave)
- Transfer time Typical 2–7 ms, max. 10 ms
- Battery 2 x 12V/9Ah
- Recharge time ≤ 8 hours (to 90 %)
- Runtime (examples) 62 min @ 100 W, 9.5 min @ 500 W
- Outlets (Schuko) 2 x CEE 7/3
- Interface USB, incl. UPSmart software
- Protection Glass fuse, surge protection, overload, Ethernet filter
- Control and monitoring LCD display, audible alarms
- Operating temperature 0–40 °C / 0–90 % RH
- Chassis and mounting Rack 19", 3U height
- Dimensions (WxDxH) 440 x 310 x 132 mm
- Weight 14.8 kg
