UPS backup power for 19'' Rack - 350W
Backup for power outages - keeps your surveillance running when the power is cut
- Approx. 1–2 hours runtime on a small system with 4 cameras and a recorder
- Can be mounted in a 19" rack / 2U
- Automatically switches to battery operation during power failure WITHOUT shutting the system down
- Automatically recharges when power is restored
- Built-in display and lots of smart features
In short: A UPS is a battery backup system that provides peace of mind, stability and continuity for your video surveillance.
There is no reviews yet. Be the first to write us your opinion
'Backup battery' of 350 Watts that can be mounted in a 19'' rack cabinet
It mounts in the rack cabinet along with your other equipment and provides backup power to the devices connected to it if the mains power fails.
Line-interactive technology
It monitors the mains voltage, frequency and phase angle, and if fluctuations or disturbances are detected, the system automatically adjusts the voltage and filters electrical noise before power is passed on to the other devices.
On power failure
In the event of a power outage, the UPS switches to battery operation immediately, without any noticeable delay.
Built-in display
It shows current information about voltage, frequency, battery capacity and load.
Control the unit from your PC
The UPS comes with software called UPSmart, which lets you connect a PC via USB so you can control it and view operating status.
- See how much battery charge is left
- See how high the load is
- Check for faults or events
- Set automatic shutdown of equipment on power loss
Key features
- Line-interactive UPS with AVR voltage regulation
- Automatic switch to battery operation during power failure (typical < 7 ms)
- Compatible with APFC power supplies and generators
- LCD display and audible alarms for operating status
- Built-in noise and surge filtering
- Management via USB and UPSmart software
- Cold-start function and automatic restart after power return
Specifications
- Rated power 360 W / 650 VA
- Input voltage 230 V AC ± 25 %
- Input frequency 50 / 60 Hz (auto-detection)
- Output voltage 230 V AC ± 10 % (approximate sine wave)
- Transfer time Typical 2–7 ms, max. 10 ms
- Battery 1 x 12V/7Ah
- Runtime (examples) 15 min @ 100 W, 6 min @ 200 W, 2 min @ 300 W
- Outlets 3 x IEC C13, 1 x Schuko (CEE 7/3)
- Interface USB, incl. UPSmart software
- Protection Glass fuse, surge protection, overload protection, Ethernet filter
- Control/display LCD display and audible alarms
- Temperature/humidity 0–40 °C / 0–90 % RH
- Enclosure and mounting Rack 19”, 2U height
- Dimensions (W x D x H) 483 x 345 x 88 mm
- Weight 7.86 kg
