Uniview ISW2000-8T2GP-POE-IN 8-port unmanaged switch
8-port unmanaged switch for video surveillance
- PoE with up to 30 W per port
- Supports IEEE 802.3af/at PoE
- VLAN mode isolates the downlink ports from each other
- CCTV mode provides transmission and power supply over up to 250 meters
- Supports flow control in both full- and half-duplex
- LED indicators help with operating status monitoring and troubleshooting
- Operating temperature from -30 °C to 65 °C
ISW2000-8T2GP-POE-IN is designed for network and video surveillance installations where you need an unmanaged PoE switch with the option to adapt the network using VLAN and CCTV mode.
| Datasheet |
| Technical specifications | |
| Model | ISW2000-8T2GP-POE-IN |
| Product type | Unmanaged Harsh PoE Switch |
| Network standards | IEEE 802.3 / IEEE 802.3u / IEEE 802.3z / IEEE 802.3ab / IEEE 802.3x / IEEE 802.3af / IEEE 802.3at |
| RJ45 ports | 8 × 10/100 Mbps RJ45 |
| SFP slots | 2 × 1000 Mbps SFP |
| Switching capacity | 5.6 Gbps |
| Forwarding performance | 4.17 Mpps |
| Packet buffer | 2 Mbit |
| MAC address table | 4K |
| Jumbo frame | 16 KBytes |
| Transfer mode | Store-and-forward |
| Flow control | IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control |
| Indicators | PWR, LNK/ACT, PoE |
| Dimensions (W × D × H) | 145 × 109 × 58 mm |
| PoE | |
| PoE standards | IEEE 802.3af / IEEE 802.3at |
| Maximum total PoE capacity | 120 W |
| Maximum PoE output per port | 30 W |
| Operating modes | |
| Supported modes | VLAN / CCTV |
| VLAN mode | Downlink ports can communicate only with uplink ports |
| CCTV mode | Ports are forced to 10 Mbps transmission rate; data transmission and power supply distance up to 250 m; downlink ports can communicate only with uplink ports |
| Power & protection | |
| DC input | 48–57 V DC |
| Power supply | Powered by adapter |
| Adapter input | 100–240 V AC, 50–60 Hz |
| Maximum power | 135 W including PoE |
| Electrostatic protection | Contact: ±6 kV; Air: ±8 kV |
| Surge protection | Differential mode: ±2 kV; Common mode: ±4 kV |
| Environment | |
| Operating temperature | -30 °C to +65 °C |
| Operating humidity | 5–95%, non-condensing |
| Storage humidity | 0–95%, non-condensing |
| Der tages forbehold for eventuelle fejl og ændringer i specifikationerne / Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
PoE switch with up to 30 W per port
The switch supports IEEE 802.3af and IEEE 802.3at and can deliver up to 30 W PoE power per port. This makes it possible to send both network connectivity and power through the network cable to compatible PoE equipment.
VLAN mode with isolated downlink ports
In VLAN mode, the downlink ports can only communicate with the uplink ports. This means the downlink ports cannot communicate directly with each other.
This can be an advantage in applications such as video surveillance, where the connected devices need to communicate through the uplink ports without being able to communicate with each other at the same time.
CCTV mode with a range of up to 250 meters
CCTV mode is designed for installations where the distance between the switch and the connected equipment is greater than normal. In this mode, the port transmission speed is forced down to 10 Mbps.
This makes it possible to transmit data and supply power over a distance of up to 250 meters. In CCTV mode, the downlink ports can only communicate with the uplink ports.
Flow control for stable data transmission
The switch supports IEEE 802.3x flow control in full-duplex mode as well as Backpressure flow control in half-duplex mode. These functions help manage data flow through the switch.
LED indicators make troubleshooting easier
The indicators on the switch panel let you quickly check the device’s operating status. This makes it easier to get an overview of the installation and can help with troubleshooting.
Operating from -30 °C to 65 °C
ISW2000-8T2GP-POE-IN is specified for operation at temperatures from -30 °C to 65 °C. This makes the switch suitable for installations where temperatures can vary significantly.
Technical key points
- Model: ISW2000-8T2GP-POE-IN
- Switch type: Unmanaged Harsh PoE Switch
- PoE standards: IEEE 802.3af/at
- Max. PoE power: 30 W per port
- Operating modes: VLAN and CCTV
- VLAN: Downlink ports communicate only with uplink ports
- CCTV: Port speed reduced to 10 Mbps
- Max. transmission and PoE distance in CCTV mode: up to 250 meters
- Full-duplex flow control: IEEE 802.3x
- Half-duplex flow control: Backpressure
- Panel indicators for status monitoring and troubleshooting
- Operating temperature: -30 °C to 65 °C
