Uniview NSW2020-16T1GT1G
Model:
NSW2020-16T1GT1G
⭐️ ⭐️ ⭐️ ⭐️ ★ ★
2.495,00
Incl. VAT
(
1.996,00
Excl. VAT
)
16 ports Gb-switch til videoovervågning og access-points
- 16+2+1 PoE-porte til kameraer, 2 uplink-porte til videre forbindelser og 1 SFP port til fiber
- 3 modes: Normal, Secure og Surveillance
- op til 30 watt pr. port, kan drive selv mange små PTZ kamera (225 watt totalbudget)
- up til 250 meters PoE i surveillance-mode
- kan monteres i racks, beslag medfølger.
- aktiv køling
- metalhus
Fordi switchen er Gb en gigabit-switch, så har den den båndbredde der skal til, for at kunne samle datastrømme fra andre switche eller fra trådløse acces-points (WIFI-noder).
| Datablad |
| Model | NSW2020-6T-POE-IN | NSW2020-10T-POE-IN | NSW2020-16T1GT1GC-POE-IN | NSW2020-24T1GT1GC-POE-IN |
| Ports | 6×100Mbps network ports (RJ45), including 4 PoE ports | 10×100Mbps network ports (RJ45), including 8 PoE ports | 16×100Mbps PoE ports (RJ45)+ 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports | 24×100Mbps PoE ports (RJ45) + 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports |
| Standards | IEEE802.3,IEEE802.3u,IEEE802.3az,IEEE802.3x,IEEE802.3af,IEEE802.3at | IEEE802.3,IEEE802.3u,IEEE802.3z,IEEE802.3ab,IEEE802.3x,IEEE802.3af,IEEE802.3at,IEEE802.3az | ||
| Switching capacity | 1.2Gbps | 2Gbps | 7.2Gbps | 8.8Gbps |
| Forwarding performance | 0.90Mpps | 1.49Mpps | 5.36Mpps | 6.55Mpps |
| Packet Buffer | 448Kbit | 448kbit | 4M bit | 4Mbit |
| MAC | 1K | 1K | 16K | 16K |
| Dimensions (W×D×H) | 107*101*25mm | 171*103*25mm | 440*195*44mm | 440*250*44mm |
| Weight | 0.19KG | 0.29KG | 2.12KG | 2.93KG |
| Power supply | DC：48/51V | AC: 100-240V, 50/60Hz | ||
| PoE | 802.3at/af （4/5+，7/8-） | |||
| Max. PoE Power | Max capacity: 60W Max capacity for single port: 30W |
Max capacity:88W Max capacity for single port: 30W |
Max capacity: 225W Max capacity for single port: 30W |
Max capacity: 370W Max capacity for single port: 30W |
| Prior Ports | 1~2 | 1~2 | 1~8 | 1~8 |
| Cooling Fans | 0 | 0 | 1 | 1 |
| Operating temperature | 0°C-40°C (32°F-104°F) | |||
| Operating humidity | 10%～90% (noncondensing) | |||
| Storage humidity | 5%～90% (noncondensing) | |||
| Indicator | POWER: Steady on: AC input is normal Off: No AC input |
|||
| No PoE Indicator | PoE: Off: No PoE power supply Steady on: PoE power supply is normal |
|||
| PoE-MAX： off ：The POE power supply power of the whole machine is less than 80% of the specification Steady on : The POE power supply power of the whole machine is greater than 85% of the specification |
||||
| LINK/ACT： Off: No link Steady on: Linked Flashing: Transmitting data |
||||
| Working Mode | Default(Normal mode) : All ports can communicate with each other. EXTEND(Surveillance mode): Transmission distance up to 250 meters. |
Default(Normal mode) : All ports can communicate with each other. VLAN(Secure mode): Downlink ports can communicate only with uplink ports. Enabling PD keepalive function, the switch will restart the IPC via PoE power when the IPC sends no message in a period of time. Extend(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports. |
||
There is no reviews yet. Be the first to write us your opinion
Power over Ethernet
Do like the professionals. POE means that only one cable is needed for the camera. The camera gets power through the network cable, typically from a recorder with built-in PoE, or from a POE switch.
