Alarm system and burglar alarm

JA-111A base for BUS outdoor siren that emits sound in case of alarm, chirp sound and PG activation, or deactivation. The lid is available in white plastic, gray plastic or brushed steel. All with red strobe.

The siren communicates and is supplied through the control panel's BUS and has both a built-in battery and a spirit level. In the event of a power failure, the siren enters power save mode.

The unit is addressable and takes up space in the control panel.

Technical specifications

JA-1X1A-C-WH is a white plastic lid, with red strobe that fits Jablotron's JA-111A, JA-151A and JA-163A.

Technical specifications

JA-150E is a wireless graphic control panel, with built-in PROX reader, for the JA-100K control panel.

The control panel has an LCD screen, RFID reader and function keys and can be found in both wireless or bus-mounted version (JA-110E).

The unit consists of four function keys that are used to operate areas, PG outputs etc. At the same time, the function keys also function as status indicators. The unit has a nice white backlight and connection for external power supply. You can also see the status of areas, temperature and information about the operating menu on the panel display.

The panel works with all JA-100 control panels.

Technical specifications

JA-159P is specially designed to be located outdoors. The detector has two built-in PIR elements, both of which must be activated simultaneously to sound the alarm, ie what is called double activation. The double activation ensures a high degree of immunity to false alarms, which is important in an outdoor environment where disturbing elements can occur, such as small animals. The detector is from Optex, but its transmitter is developed by Jablotron. The detector must use two CR123 batteries. In addition, it has both anti-mask function and has anti-tamper alarm built-in. Anti-mask, in case something tries to cover the detector, and anti-sabotage ensures that the detector cannot be taken down or opened without sending a tamper alert. In addition, the detector performs continuous tests, and notifies if something is wrong.

If you want to increase the range, it is possible with Jablotron's 3-pin external antenna.

Note that the module is addressable and takes up one space in the control panel.

JA-111ST-A detects fire hazard indoors. It can be used both for residential and commercial purposes. In addition, it is possible to install it in caravans, motorhomes and caravans. However, it is not applicable in industrial environments. The detector is made to also be able to activate other JA-151ST-A or JA-111ST-A detectors in the installation, and then it also acts as a siren for the alarm. It can also operate independently, in case of lost connection, as long as it is equipped with backup batteries. The unit can be set to detect smoke AND heat, smoke OR heat, ONLY smoke or ONLY heat. This is possible because it consists of two individual detectors. A heat detector and an optical smoke detector - which detect a change in light reflection in its built-in smoke chamber. It also has a built-in light sensor that can be used for test signal. The unit sends both a signal to the alarm center and warns locally.

Note that the detector takes up one space in the system.

JA-114HN is a BUS module with 4 inputs and outputs, which can be used, for example, to take over wireless alarm systems where you choose to keep the old detectors. However, the module can also control devices through the PG outputs. The unit has a secondary power supply that is capable of supplying voltage to relays connected to the signal output. In addition, it has adjustable EOL resistance values and the ability to adjust the resistance values of the inputs. The module's PG outputs are galvanically separated and share two common C-terminals. The module is equipped with tamper switch in front and rear, and works excellently in interaction with fog generators.

Technical specifications

JA-103K-LAN is the base of the JABLOTRON 100+ series. It is flexible, user-friendly and can be used to secure houses and businesses. The control panel is set up and set up via F-Link, from version 2.0.0.

JA-103K:
- up to 50 wired BUS devices
- up to 50 user codes
- up to 8 areas
- up to 32 programmable outputs (PG)
- 20 independent calendars
- reports from the system to 8 users via SMS
- 5 KC
- 5 selectable protocols for KC
- Maintenance condition (not technician)
Day / Night mode
Shortened expiration time
- Automated settings
- Advanced calendar function

LAN transmitter is built into PCB, but JA-192Y (GSM / GPRS module) and JA-111R (radio module) are purchased separately.

To store log events, voice recordings and PIR photos, a 1 GB memory card is included on the PCB.

Terminals on PCB print:
1x BUS terminal
1x terminal for the radio module (JA-111R)
1 x terminal for GSM / GPRS communication module (JA-192Y)

Technical specifications

The JA-191Y is a GSM / GPRS transmitter that is connected to the JA-100K, JA-101K and JA-106K control panels.

The JA-191Y module can in collaboration with a central communicate with a KC via GSM network. It allows you to send voice messages or alarm text messages. In addition, it allows you to remotely control via web applications or mobile apps.

In addition, the module can also be programmed remotely via the F-Link software.

Technical specifications