Uniview 16-channel Analog/Hybrid DVR Recorder
Uniview XVR302-16Q3 16-channel analog recorder with hybrid capability
\r\n- \r\n
- 16 BNC inputs for analog cameras \r\n
- Supports TVI, AHD, CVI and CVBS \r\n
- Can also be used with IP cameras (hybrid) \r\n
- Up to 8MP resolution. \r\n
- Up to 4K HDMI output \r\n
- Supports H.265 compression \r\n
- 2 hard drives up to 8TB per disk \r\n
- Alarm in and out \r\n
- Audio in and out and two-way audio \r\n
- Network access via app and PC \r\n
- ONVIF-compatible. \r\n
- Four alarm inputs and one alarm output. \r\n
- Supports intelligent analytics, human and vehicle detection, and alarm messages. \r\n
A good recorder for keeping an old surveillance system alive while enabling a gradual move to IP.
You can access the recorder from mobile, tablet and PC via Uniview's app and software. From there you can view live images, play back recordings and manage the system no matter where you are.
| Datablad |
| Model | XVR302-16Q3 | |
| Video/Audio Input | ||
| Analog Video Input | 16-ch, BNC | |
| IP Video Input | 8-ch(only IP up to 24ch), each channel up to 8MP | |
| Supported Analog Camera Types | Support AHD input: 8MP@15fps 5MP@20fps 4MP@30fps 1080P@30fps 720P@60fps Support TVI input: 8MP@15fps 5MP@20fps 4MP@30fps 1080P@30fps 720P@60fps Support CVI input: 8MP@15fps 5MP@25fps 4MP@30fps 1080P@30fps 720P@30fps Support CVBS input |
|
| Audio Input | 1-ch, RCA | |
| Audio Compression | G.711U | |
| Video/Audio Output | ||
| CVBS Output | 1-ch, BNC | |
| VGA Output | 1920x1080p/60Hz, 1920x1080p/50Hz, 1600x1200/60Hz, 1280x1024/60Hz, 1280x720/60Hz, 1024x768/60Hz | |
| HDMI Output | 4K(3840X2160)/30Hz, 1920x1080p/60Hz, 1920x1080p/50Hz, 1600x1200/60Hz, 1280x1024/60Hz, 1280x720/60Hz, 1024x768/60Hz | |
| Audio Output | 1-ch, RCA | |
| Synchronous Playback | 16 | |
| Live view display | HDMI/VGA: 1/4/6/8/9/16/25 | |
| Two-way Audio | 1-ch, RCA | |
| Network | ||
| Incoming Bandwidth | 80Mbps (Up to 112Mbps after all analog channel conversion) | |
| Outgoing Bandwidth | 160Mbps | |
| Remote Users | 128 | |
| Protocols | TCP/IP, P2P, UPnP, NTP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, SMTP | |
| Browser | IE(IE10/11) for Windows Firefox (version 52.0 and above) for Windows Chrome(version 45 and above) for Windows Edge(version 79 and above) for Windows |
|
| Encoding | ||
| Recording Resolution | 8MP Lite/5MP Lite/4MP Lite /1080P/720P/D1 | |
| Recording Frame Rate | Main stream | Sub stream |
| 8MP Lite@8fps | D1@8fps | |
| 5MP Lite@12fps | D1@12fps | |
| 4MP Lite@15fps | D1@12fps | |
| 1080P@15fps | D1@12fps | |
| 720P@30fps | D1@12fps | |
| Audio Sample Rate | 8KHz,16 bit per channel | |
| Audio Bit Rate | 64Kbps per channel | |
| Decoding | ||
| Capability | Analog: 16 x 8MP Lite@8, 16x 5MP Lite@12, 16x 4MP Lite@15, 16 x 1080P@15, 16 x 720@30 IP: 24 x D1@30, 16 x 720P@30, 8 x 1080P@30 |
|
| Hard Disk | ||
| SATA | 2 SATA interfaces | |
| Capacity | Up to 8TB for each HDD (The maximum HDD capacity varies with environment temperature) |
|
| General Alarm | ||
| General Alarm | Motion detection | |
| Alert Alarm | IP Conflict, Network Disconnected, Disk offline, Disk Abnormal, Illegal Access, Hard Disk Space Low, Hard Disk Full, Recording/Snapshot Abnormal | |
| External Interface | ||
| Network Interface | 1 RJ45 10M/100M/1000M self-adaptive Ethernet Interface | |
| USB Interface | Rear panel: 1 x USB3.0, Front panel: 1xUSB2.0 | |
| Serial Interface | 1 x RS485 | |
| Alarm In | 4 | |
| Alarm Out | 1 | |
| General | ||
| Power Supply | 12V DC Power Consumption: ≤ 12 W( without HDD ) |
|
| Working Environment | -10°C~+ 55°C (+14°F~+131°F), Humidity ≤ 90% RH (non-condensing) | |
| Dimensions(W×D×H) | 380mm ×326mm× 53mm (15.0" × 12.8"×2.1") | |
| Weight ( without HDD ) | ≤2.0 Kg ( 4.4lb ) | |
| Certification | ||
| Certification | UL /CE /FCC /RoHS /WEEE | |
There is no reviews yet. Be the first to write us your opinion
Take your analog video system into the future with this recorder
\r\nA hard-disk recorder suitable for all types of analog surveillance. The smart thing about a hybrid recorder is that it supports analog cameras, HD cameras over coaxial cables, and IP cameras.
\r\nThe XVR302-16Q3 is a 16-channel recorder mainly designed for analog surveillance cameras. That means the cameras connect directly via coaxial cable using BNC connectors.
\r\nIt supports the most common analog standards such as TVI, AHD, CVI and CVBS. That makes it suitable for both new installations and upgrades of existing analog systems.
At the same time, the recorder can also be used as a hybrid. That means you can combine analog cameras with IP cameras on the same recorder. That can be an advantage if you want to upgrade gradually from analog to IP.
\r\n
HD video on the existing cables
\r\nThe optimal and most future-proof solution is of course to replace the old cables with network cables and install IP cameras, which this XVR also supports. But there are many good reasons why the old cables might not be replaced. Whether it’s due to budget or other reasons, this recorder lets you reuse the old cables while still getting the benefit of HD cameras.
\r\nThese cameras offer 2K resolution (5 megapixels) and can deliver high-resolution images together with this recorder.
\r\n\r\n
16 channels via BNC
\r\nThe recorder has 16 BNC inputs for analog cameras. Each channel can be adapted to the connected camera type so the system automatically detects the signal format.
This makes installation more flexible and reduces the need for manual configuration.
\r\n
Make the "dumb" analog cameras intelligent
\r\nThe built-in analytics can make an ordinary camera smart. You can apply these analytics to the analog channels:
\r\n- \r\n
- Ultra Motion Detection (people and vehicles). \r\n
\r\n
Supports all major protocols
\r\nTVI, CVI, AHD and CVBS – in short, the most common standards for connecting HD cameras via analog cables.
\r\n\r\n
Hybrid support for IP cameras
\r\nIn addition to the analog inputs, the recorder can handle IP cameras over the network. That means you can add network cameras and combine them with analog cameras in the same system.
This allows you to expand or modernize the installation without replacing all equipment at once.
\r\n
Video output up to 4K
\r\nThe recorder has an HDMI output with support for up to 4K resolution. There are also VGA and CVBS outputs.
HDMI and VGA can be used simultaneously, allowing both a local monitor and additional display.
\r\n
Recording and compression
\r\nThe recorder supports H.265 and H.264 video compression. That means recordings take up less space on the hard drive compared to older formats.
This provides longer recording time on the same storage capacity.
\r\n
Space for two hard drives
\r\nThere is room for two internal hard drives with up to 8TB per drive. Total storage capacity depends on hard drive choice and recording settings.
This makes the recorder suitable for installations where longer archiving time is desired.
\r\n
Alarm and audio
\r\nThe recorder has alarm inputs and outputs so it can be connected to other security equipment. In addition, audio in and out as well as two-way audio are supported.
This makes it possible to integrate the recorder into a larger alarm system or use audio together with video.
\r\n
Access from anywhere in the world
\r\nIt's very easy to access both live and playback from home, the office, the summer house and the rest of the world. It supports:
\r\n- \r\n
- An app for iPhone and iPad. \r\n
- An app for Android (both phones and tablets). \r\n
- PC (both via web interface and VMS software). \r\n
- Mac (VMS software). \r\n
- Local displays via HDMI output in 4K resolution. \r\n
You don't even need to open ports on your router or have a fixed IP address — just scan the QR code with your app.
\r\n\r\n
Technical key points
\r\n- \r\n
- 16-channel analog recorder \r\n
- Supports TVI, AHD, CVI and CVBS \r\n
- Hybrid support for IP cameras \r\n
- HDMI output up to 4K \r\n
- 2 SATA ports, up to 8TB per hard drive \r\n
- H.265 and H.264 compression \r\n
- 4 alarm inputs / 1 alarm output \r\n
- Audio in and out \r\n
- Network port RJ45 \r\n
- Power: 12V DC \r\n
\r\n
\r\n
ONVIF full member
Hvor stor en harddisk skal jeg vælge?
Optagere leveres som udgangspunkt uden harddisk, for behovet er ikke det samme for alle.
Når du optager din videoovervågning, så er der flere ting der påvirker, hvor meget optagelserne fylder.
Helt oplagt så betyder antallet af kameraer, og deres opløsning meget - men din konfiguration, og hvor meget der sker foran kameraet, har også en betydning.
Udgangspunktet er, at man hellere skal optage en time for meget end et minut for lidt. Omvendt gider normalt kun nordmænd lave videoer, der viser at græsset gror.
Brug beregneren til at få en fornemmelse af dit pladsbehov. Synes du det er spændende, så læs lidt mere om pladsoptimering nederst på siden. Og har du vigtigere ting for - så bare ring til os...
1) Vælg kameraets opløsning...
2) Vælg antal kameraer...
3) Vælg størrelsen på harddisken...
4) Vælg antal timer med optagelse per dag... 6
1 time
24 timer
Resultat:
Lagringspladsen svarer til cirka timers videooptagelse.
Med 6 timers optagelse pr dag, kan du typisk gå dage tilbage i tid.1)
1) Værdierne er tilnærmede, og baseret på typiske indstillinger med 25 billeder i sekundet og h265 komprimering.
