Jablotron JA-100

The JA-100K is a control panel from the JABLOTRON JA-100 line, with a built-in LAN transmitter. It is primarily for private installation, such as securing a private house with can also be used for smaller business. Setup and setting up of the control panel takes place via F-Link software.

JA-100K:
- up to 32 wireless or wired BUS devices
- up to 32 user codes
- up to 4 areas
- up to 4 programmable outputs (PG)
- up to 3 radio modules
built-in LAN
- 10 independent calendars
- reports from the system to 8 users via SMS
- 8 users have the option of voice and SMS report
- 4 selectable special codes for KC (with individual ID)

On the board is a built-in LAN transmitter that provides communication with MyJablotron, MyCompany and to KC. You can also choose to expand the control panel with JA-111R radio module and JA-1907Y GSM module.

The following areas differ from JA-100 from JA-101 and JA-106
- Only one exit / entry delay
- New zone type 'Garage door' extends entry / exit time;
- The exit time is extended even if the 'Garage door' is closed when connected
- The entry time is determined by whether it is a 'delayed' or 'garage door' zone that is opened
- The entry time is not extended if the 'delayed' zone starts it, and the 'garage door' is subsequently opened during the entry time
- Users can not be added in PG outputs, they are added in the internal settings on BP / bypass
- The JA-150E can control multiple PG outputs
- JA-150E does not have the option 'Indicates / checks PG'
- The JA-123E can only control one PG output
- The PG Activation column is removed on the Devices tab
- PG activation of devices is set in the internal settings of the PG output
- Limited possibilities for PG outputs 'reaction to' i.a. lacks the ability to invert an output with 'system event'
- The reaction 'Second PG' is missing - it limits simple door control considerably
- PG output function limited to 'Enable / disable' 'Impulse' and 'copy'
Missing PG output functions: 'delayed copy', 'extended copy' and 'change'
- No possibility of time limitation of users
- 4/6 digit codes - not 8 digits, not prefix
- One card per. user
- No Message A / B / C / D zone type
- No Repetition Zone Type
- 10 calendar events

Technical specifications

JA-106K is a control panel with built-in GSM / LAN transmitter (without battery). The control panel is part of the JABLOTRON 100 series and is good if you want to secure many areas, eg companies or larger houses. Setup and setting up of the control panel takes place in F-Link software.

JA-106K:
- up to 120 wired BUS devices
- up to 300 users
- up to 15 areas
- up to 32 programmable outputs (PG)
- 20 independent calendars
- reports from the system to 30 users via SMS
- 5 users have the option of voice and SMS report
- 4 KC
- 5 selectable special codes for KC

On the main board, there is a built-in GSM / GPRS and LAN transmitter. It can communicate by audio / voice, SMS, GPRS to the end user or to KC. To be able to save log events, voice recordings, photos from photo-PIR etc. it comes with a 1 GB memory card on the main board.

The following terminals are located on the main board:
- 2x independent BUS terminals
- 1x terminal for the radio module (JA-110R)
- 1x terminal for PSTN transmitter (JA-190X

Technical specifications

The JA-111R 80 is a radio module that provides communication between the JABLOTRON 100 system and one-way wireless devices from the JABLOTRON 80 Oasis system. This is useful if you want to upgrade your Oasis system to a JABLOTRON 100 system while retaining some original devices. In addition, the module can also be combined in the system with JA-11xR modules that communicate with JABLOTRON 100 devices - such as sirens, control panels, PIR etc.

JA-8x detectors and magnetic switches and RC-8x hand transmitters are supported by the module.

The following devices do not: JA-8xF, JA-84P, JA-80Z, JA-80x, TP-xx, AC-8x, UC-82 and JA-8xK.

Please note that the module is compatible with F-Link 1.4.0 or later.

Technical specifications

JA-112E BUS is a control panel, only with PROX reader, used to control the system.

The product comes with a single control panel, to control the alarm, but can be used with up to 20 JA-192E control panels. Both power supply and communication take place through BUS cable. The unit has a built-in sleep time, to reduce the load on the control panel. In addition, the panel is addressable and takes up space in the control panel.

Note that the panel is not compatible with JA-100kx control panels.

JA-113E BUS is a control panel that has a keyboard and a built-in PROX reader to control the system. One control panel is included, and it is possible to expand the control panel by up to 20 control panels (JA-192E). With the control panels, it is quite easy to control the alarm. The control panel takes up one space in the control panel, but due to its built-in sleep mode, it is not very stressful for the control panel. The BUS cable supplies power to the device and also enables communication.

Note that the product is not compatible with JA-100kx control panels.

Technical specifications

JA-112P (G) BUS PIR is a detector from Jablotron that detects movement indoors and which covers up to 12 m at 90 °. This version has a gray lens that reduces the risk of false alarms caused by white light from cars, reflective surfaces, sun rays and more.

Technical specifications

JA-122PW (G) is a combined PIR and microwave detector, in gray. The device is bus-based and is part of the JABLOTRON 100+ series. It can detect human movement inside and has a high degree of immunity to false alarms, due to the combination of microwave detection and PIR. In order for it to sound the alarm, the PIR activation must first be confirmed by the microwave detection. The gray lens that the detector is equipped with increases immunity to white light (up to 10,000 lux), which is far above the standard requirements. This thus lowers the risk of false alarms further, as things like car headlights and reflective surfaces do not interfere. You can choose between two levels of immunity, PIR and MW. The device takes up one space in the system, and also has a pulse response.

The JA-122PW is a combined PIR and microwave detector. The device is bus-based and is part of the JABLOTRON 100+ series. It can detect human movement inside and has a high degree of immunity to false alarms, due to the combination of microwave detection and PIR. In order for it to sound the alarm, the PIR activation must first be confirmed by the microwave detection. The gray lens that the detector is equipped with increases immunity to white light (up to 10,000 lux), which is far above the standard requirements. This thus lowers the risk of false alarms further, as things like car headlights and reflective surfaces do not interfere. You can choose between two levels of immunity, PIR and MW. The device takes up one space in the system, and also has a pulse response.

Technical specifications

JA-120PB is a BUS detector from Jablotron, with combined PIR and acoustic glass breakage. PIR sensor detects movement, while GBS sensor (glass breakage) analyzes changes in sound and air pressure. If desired, the detector can be optimized with alternative lenses from Jablotron: JS-7904, JS-7906 or JS-7901.

The detector must be registered in two consecutive zones in the system.

Technical specifications

JA-115P is a BUS-based 360 ° PIR ceiling detector. It can detect movement indoors and is different from the other motion detectors of the JABLOTRON 100 series, due to its increased immunity to pets and its modified detection characteristics. The unit is made for installation in the ceiling and has, when installed 3.5 m above the floor, 360 ° coverage with up to 5.5 m radius. It is possible to choose between two levels of detection sensitivity, depending on how high immunity to false alarms you want. In addition, the detector has a pulse response.

If it is not possible to hide the cable in the ceiling, you can use the PLV-P-ST mounting plate, for the same purpose.

The device takes up one space in the system.