Jablotron

JA-159P is specially designed to be located outdoors. The detector has two built-in PIR elements, both of which must be activated simultaneously to sound the alarm, ie what is called double activation. The double activation ensures a high degree of immunity to false alarms, which is important in an outdoor environment where disturbing elements can occur, such as small animals. The detector is from Optex, but its transmitter is developed by Jablotron. The detector must use two CR123 batteries. In addition, it has both anti-mask function and has anti-tamper alarm built-in. Anti-mask, in case something tries to cover the detector, and anti-sabotage ensures that the detector cannot be taken down or opened without sending a tamper alert. In addition, the detector performs continuous tests, and notifies if something is wrong.

If you want to increase the range, it is possible with Jablotron's 3-pin external antenna.

Note that the module is addressable and takes up one space in the control panel.

JA-114HN is a BUS module with 4 inputs and outputs, which can be used, for example, to take over wireless alarm systems where you choose to keep the old detectors. However, the module can also control devices through the PG outputs. The unit has a secondary power supply that is capable of supplying voltage to relays connected to the signal output. In addition, it has adjustable EOL resistance values and the ability to adjust the resistance values of the inputs. The module's PG outputs are galvanically separated and share two common C-terminals. The module is equipped with tamper switch in front and rear, and works excellently in interaction with fog generators.

Technical specifications

JA-110Z-C can divide the system BUS into several branches. The print is square, has straight terminal blocks and a small hole. It is possible to mount it in a JA-190PL.

JA-103K-LAN is the base of the JABLOTRON 100+ series. It is flexible, user-friendly and can be used to secure houses and businesses. The control panel is set up and set up via F-Link, from version 2.0.0.

JA-103K:
- up to 50 wired BUS devices
- up to 50 user codes
- up to 8 areas
- up to 32 programmable outputs (PG)
- 20 independent calendars
- reports from the system to 8 users via SMS
- 5 KC
- 5 selectable protocols for KC
- Maintenance condition (not technician)
Day / Night mode
Shortened expiration time
- Automated settings
- Advanced calendar function

LAN transmitter is built into PCB, but JA-192Y (GSM / GPRS module) and JA-111R (radio module) are purchased separately.

To store log events, voice recordings and PIR photos, a 1 GB memory card is included on the PCB.

Terminals on PCB print:
1x BUS terminal
1x terminal for the radio module (JA-111R)
1 x terminal for GSM / GPRS communication module (JA-192Y)

Technical specifications

The JA-191Y is a GSM / GPRS transmitter that is connected to the JA-100K, JA-101K and JA-106K control panels.

The JA-191Y module can in collaboration with a central communicate with a KC via GSM network. It allows you to send voice messages or alarm text messages. In addition, it allows you to remotely control via web applications or mobile apps.

In addition, the module can also be programmed remotely via the F-Link software.

Technical specifications

JA-194Y is a GSM / GPRS communication module for installation in the JA-103K and JA-107K control panel.

JA-194Y makes it possible to control remotely via the Internet and the MyJablotron application. This is done by the JA-194Y using the GSM network to communicate with a control center. In addition, with JA-194Y you can also remotely configure the control panel via F-Link SW.

Properties:

• The control panel can send event and alarm reports via SMS. (JA-103k 8 sms / call) (JA-107K 50 sms and 15 calls)
• The system can be remotely controlled and programmed through the telephone. (call and use the voice menu or use SMS commands)
• The system (or appliances in the home) can be controlled remotely via authorized telephone numbers.
• Free F-Link software allows you to both remotely control and configure the system.
• Remote control via MyJablotron and MyCompany
• Transmits data to up to 5 control centers

The JA-123E is an outdoor keyboard with RFID / bypass, and part of the JA-100 series. With the bypass switch you can activate a PG output, which allows for things like door control or start of entry time. If desired, it can also be programmed to act as the system area connector.

Also available as PROX reader without keyboard: JA-122 E

JA-114E is a control panel used to control the system. The panel has both LCD, keyboard and built-in PROX reader and one control panel is included, but it is actually possible to expand the control panel by up to control panels (JA-192E). With the help of the control panels, it is quite simple to control the alarm. The control panel is both supplied and communicates through a BUS cable. The unit has a built-in sleep time, which reduces the load on the control panel, where it otherwise takes up one space. PG outputs, log events, zones and areas can be controlled via the panel menu.

Please note that the JA-114E is not compatible with JA-100kx control panels.

Technical specifications

JA-120PC is a BUS PHOTOPIR detector from Jablotron. It can detect human movement, in building or premises, and confirm alarm with a picture, taken in colors. In addition, the detector can also take a picture in the event that a PG output is activated, ie in the event of water damage or fire.

The image is taken first in low resolution (320x240 pixels) and then in high resolution (640 × 480 pixels). If it is dark, the camera uses the built-in flash. The images are stored on the detector's internal micro SD card and the low-resolution image is then sent on to the control panel. From here it can be forwarded to an external server, user or KC.

If you want to see the pictures, F-Link or J-Link can be used. They can be found in the event log in low resolution, but if you click on details you can find the image in higher resolution.
In addition, you also have the option of having the image sent to you directly from MyJablotron web self-service.

The detector can also be set up to take a pre-alarm picture, whereby it can send a picture either at input time or while only one alarm has gone off.

Immunity to false alarms can be set to two levels. Either rapid reaction + basic immunity, or slower reaction + higher immunity.

Technical specifications

JA-150A II is a wireless indoor siren that sounds an alarm in case of burglary, entry / exit time and can indicate other activations in the control panel. The siren also has a programmable button.

Be aware that the siren takes up one space in the control panel and that batteries are purchased separately.

Technical specifications

JA-112I is an indicator, made to show area status or PG activation (1-128). It does so by illuminating with its red LED lamp. The indicator is connected to the control panel via BUS cable.

Note that the device is not addressable and does not take up any space in the control panel.

JA-194PL is a multi installation box.

The installation box is designed for Jablotron modules and then it has an anti-tamper switch both in front and behind. The box is suitable for input modules, output modules, terminal modules, hubs and others.

Technical specifications