Jablotron

If you need wireless temperature measurement in outdoor or climatically demanding environments (IP 53), JB-EXT-TH-R makes this possible. It does this using an internal or external sensor. The internal sensor, which is part of the product, measures the temperature in a range from -25 to 60 ° C. If you need something that can measure temperatures on both gas, liquid or solids, in the range from -50 to 200 ° C, you must, however, have a JB-TS-PT1000, which is an external sensor (not included) .

The measured data is sent to MyJablotron, where it is analyzed and saved for later use. This could be for activating a selected PG output, SMS reporting when temperature limits are exceeded or for creating diagrams of the measured temperatures. All these features are programmable in the MyJablotron app.

Note that PG control is only assigned to a maximum of two thermometers per central.

Cloud Jablotron can notify if temperature limits are exceeded, display graphs of previously measured temperatures, and can be programmed to notify different people when different criteria are met - e.g. by temperature drop or rise.

JB-EXT-TH-R is thus optimal for monitoring temperatures in server rooms and refrigerated display cases, or for, for example, frost-proofing a holiday home.

JA-118M BUS is a module with eight zone inputs, for magnetic switches. It is possible to program the zones individually, as single balanced, NC or special grid alarm;
where multiple activations are required before an alarm can be triggered. The module can be installed in the JA-190PL or KU-68 sockets.

Please note that the cable length must not exceed 100 m, between module and zone.

Technical specifications

JA-116H BUS is a BUS-based expansion module from Jablotron, which is used for supply and connection of up to 16 third-party detectors with contact outputs.

The JA-116H can be installed directly in the JA-107K control panel and can be mounted in a JA-194PL multi-installation box in MEDIUM.

Technical specifications

The JA-120Z is a wireless BUS device belonging to the JA-100 system. With this it is possible to extend the data bus by 2 x 500 meters per. JA-120Z unit. The unit has a built-in power supply of 2A, with battery back-up. The data bus can be a maximum of 2000 meters, so up to three JA-120Z can be mounted in a row. The data buses are galvanically isolated.

It is recommended that you install the JA-120Z in a PLV-CP-L enclosure.

The device supports from 7 to 18 Ah battery, depending on the type of mounting cabinet. It is also able to integrate with F-Link, with current status information and setting.

Technical specifications

JA-110N BUS is a PG output relay, for mounting on YOUR rail. It has a switch set (NO / NO / C) and can be loaded with a maximum of 230V / 16A (8A). The module is connected to the control panel's BUS and loaded into the control panel, where it takes up one unit space. It both communicates and is supplied by the central bus.

Supported up to 128PG with version or higher: FW: LY6211.03.1, HW: LY11003.

Please note that versions with lower HW / FW are only supported up to 32PG.

Jablotron 's JB-110N is a BUS equipped PG output module designed to provide a NO / NC / C contact set with a maximum load of 8A. For example, the JB-110N can be used to turn things on or off, such as lights or fans.

- The PG output is programmed with a DIP switch (1-128)
- Several controlled by the same PG outputs can be mounted.
- Communicates and is supplied via the control panel's BUS.
- The PG module fits in the mounting boxes JA-190PL, JA-194PL and JA-195PL.

Note that the JB-110N replaces the previous JA-110N module, and also that the device does not take up space in the system as it is not addressable.

JB-111N is a BUS based PG output module, which is intended to provide a NO / NC / C contact set with a maximum of 8A in load.

- The PG output is programmed with a DIP switch (1-128)
- Several controlled by the same PG outputs can be mounted.
- The module communicates and is supplied via the control panel's BUS.
- The unit fits in the mounting boxes JA-190PL, JA-194PL and JA195PL.

Note that the JB-111N replaces the previous JA-111N module, and also that the device does not take up space in the system as it is not addressable.

Technical specifications

The output module JB-118N is made to give signals status in eight areas.

Signal IW / EW alarms in the 8 areas
or status of 8 PG outputs.
- The module fits in a JA-19xPL box.
- The outputs are galvanically isolated from the bus
- The setting is made via a DIP switch (PG 1-128).

Note that this unit is not addressable and does not take up space in the control panel.

Technical specifications

The JA-150N is a wireless PG output module that copies the status of a selected PG output in the JA-100 system (PG1 to PG 32).
The PG module is addressed on the board via the 5 DIP switches.

Note that the module does not take up any space in the control panel.

JA-192PL-A is a universal can that can be used, for example, for Jablotron's JA-111 modules and their JA-151TH temperature detector.

JA-110T BUS is an insulator that can separate and protect a BUS connection in an unprotected area, against short circuit. The unit can be mounted in a JA-190PL box and is supplied through the control panel's BUS.

Be aware that it must not be addressed and therefore does not take up space in the exchange.

Technical specifications

JA-110Z-B can divide the system BUS into several branches. The print is square, has sloping terminal blocks and a large hole. The module can be mounted in a JA-190PL.

The JA-110Z-D module can divide the BUS into several branches by removing the jumpers. The print is rectangular, has sloping elevator terminals, and center hole for cable insertion. The module is the same size as the JA-116H 8 x 4 terminals with elevator terminals. The module can be mounted in JA-194PL JA-106K PLV-CP-M / L and has a capacity for connection of up to 32 x CC-01.