Hikvision DS-2CD2086G2H-IU 8 MP AcuSense camera with DarkFighter and microphone
8 MP bullet camera with AcuSense, DarkFighter, built-in microphone, and IR illumination up to 40 meters.
- 8 MP / 4K resolution with up to 3840 × 2160 pixels
- AcuSense classifies people and vehicles
- DarkFighter delivers better images in very low light
- Built-in microphone for audio together with video
- Line crossing and intrusion with person and vehicle detection
- IR illumination with a range of up to 40 meters
- Available with 2.8 mm or 4 mm fixed lens
- Supports SD cards up to 512 GB
- PoE makes it possible to run power and data through the same cable
- IP67 and metal housing for indoor and outdoor installation
Hikvision DS-2CD2086G2H-IU is an 8 MP AcuSense bullet camera with DarkFighter and a built-in microphone. The high 4K resolution delivers a detailed image, while AcuSense uses Deep Learning to distinguish people and vehicles from other movement. The camera is also designed for areas with very little light and has built-in IR illumination with a range of up to 40 meters when it gets completely dark.
You can control the camera from your mobile phone, your tablet - or your PC.
| Technical specifications | |
| Model | DS-2CD2086G2H-IU |
| Camera type | 8 MP AcuSense Powered-by-DarkFighter fixed mini bullet network camera with built-in microphone |
| Image sensor | 1/1.8" Progressive Scan CMOS |
| Maximum resolution | 3840 × 2160 |
| Minimum illumination | Color: 0.0008 lux @ F1.0, AGC on; B/W: 0 lux with IR |
| Shutter time | 1/3 s–1/100,000 s |
| Day / night | IR cut filter |
| Wide Dynamic Range | 120 dB |
| Signal-to-noise ratio | ≥52 dB |
| Low-light technology | Powered-by-DarkFighter |
| Angle adjustment | Pan: 0–360°; tilt: 0–90°; rotation: 0–360° |
| Lens and illumination | |
| Lens type | Fixed focal lens |
| Lens options | 2.8 mm or 4 mm |
| Lens mount | M16 |
| Iris type | Fixed |
| Aperture | F1.0 |
| Field of view, 2.8 mm | Horizontal: 105.1°; vertical: 54.8°; diagonal: 128.2° |
| Field of view, 4 mm | Horizontal: 90.0°; vertical: 45.8°; diagonal: 109.4° |
| Depth of field, 2.8 mm | 3.3 m to ∞ |
| Depth of field, 4 mm | 3.8 m to ∞ |
| Supplement light | IR |
| IR range | Up to 40 m |
| IR wavelength | 850 nm |
| Smart Supplement Light | Yes |
| DORI | |
| 2.8 mm lens | Detect: 89 m; observe: 35 m; recognize: 17 m; identify: 8 m |
| 4 mm lens | Detect: 109 m; observe: 43 m; recognize: 21 m; identify: 10 m |
| Video | |
| Main stream, 50 Hz | 25 fps at 3840 × 2160, 3200 × 1800, 2688 × 1520, 1920 × 1080 or 1280 × 720 |
| Main stream, 60 Hz | 24 fps at 3840 × 2160; 30 fps at 3200 × 1800, 2688 × 1520, 1920 × 1080 or 1280 × 720 |
| Sub stream | 50 Hz: up to 25 fps at 1280 × 720, 640 × 480 or 640 × 360; 60 Hz: up to 30 fps at 1280 × 720, 640 × 480 or 640 × 360 |
| Third stream | Up to 10 fps at 1920 × 1080, 1280 × 720, 640 × 480 or 640 × 360; supported under certain settings |
| Main stream compression | H.265, H.264, H.264+ and H.265+ |
| Sub stream compression | H.265, H.264 and MJPEG |
| Third stream compression | H.265 and H.264; supported under certain settings |
| Video bit rate | 32 kbps–16 Mbps |
| H.264 profiles | Baseline Profile, Main Profile and High Profile |
| H.265 profile | Main Profile |
| Bit rate control | CBR / VBR |
| Scalable Video Coding | H.264 and H.265 encoding |
| ROI | 1 fixed region for main stream and sub stream |
| Image | |
| Day / night modes | Day, night, auto or schedule |
| Image enhancement | BLC, HLC and 3D DNR |
| Image settings | Rotate mode, saturation, brightness, contrast, sharpness, gain and white balance |
| Privacy masking | 4 programmable polygon privacy masks |
| Image parameter switch | Yes |
| AcuSense and intelligent functions | |
| AcuSense | Deep-learning-based human and vehicle classification |
| Perimeter protection | Line crossing detection, intrusion detection, region entrance detection and region exiting detection |
| Target classification | Supports alarm triggering by specified target types: human and vehicle |
| Motion detection | Supports alarm triggering by specified target types: human and vehicle |
| Face capture | Yes |
| Scene change detection | Yes |
| Additional events | Video tampering alarm and exception detection |
| Linkage methods | Upload to FTP, NAS or memory card; notify surveillance center; send email; trigger recording; trigger capture |
| Audio | |
| Built-in microphone | Yes |
| Environmental noise filtering | Yes |
| Audio sampling rate | 8 kHz, 16 kHz, 32 kHz, 44.1 kHz or 48 kHz |
| Audio compression | G.711, G.722.1, G.726, MP2L2, PCM, MP3 and AAC-LC |
| Audio bit rate | 64 kbps (G.711ulaw/G.711alaw); 16 kbps (G.722.1); 16 kbps (G.726); 16–64 kbps (AAC-LC); 32–192 kbps (MP2L2); 8–320 kbps (MP3) |
| Network and storage | |
| Ethernet interface | 1 × RJ45 10/100 Mbps self-adaptive Ethernet port |
| ONVIF | Profile S, Profile G and Profile T |
| API | ONVIF, ISAPI, SDK and ISUP |
| Network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, SNMP, WebSocket, WebSockets, SRTP and SFTP |
| Simultaneous live view | Up to 6 channels |
| Users | Up to 32 users; administrator, operator and user levels |
| Security | Password protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for ONVIF, RTP/RTSP over HTTPS, control timeout settings, security audit log, TLS 1.1/1.2/1.3 and host authentication by MAC address |
| On-board storage | MicroSD / microSDHC / microSDXC card, up to 512 GB |
| Network storage | NAS via NFS or SMB/CIFS |
| ANR | Auto Network Replenishment supported |
| Client software | iVMS-4200, Hik-Connect and Hik-Central |
| Reset key | Yes |
| Power and environment | |
| Power supply | 12 VDC ±25%, 0.58 A, reverse polarity protection |
| PoE | IEEE 802.3af, Class 3 |
| Maximum power consumption, 12 VDC | 7 W |
| Maximum power consumption, PoE | 8.5 W |
| Power interface | Ø5.5 mm coaxial power plug |
| Operating temperature | -30 °C to +60 °C |
| Storage temperature | -30 °C to +60 °C |
| Humidity | ≤95%, non-condensing |
| Ingress protection | IP67 |
| Anti-corrosion protection | No specific protection |
| Physical specifications | |
| Material | Metal front cover, metal body and metal bracket |
| Dimensions | Ø74.4 × 179.2 mm |
| Weight | Approx. 525 g |
| Compatible accessories | |
| Vertical pole mount | DS-1275ZJ-SUS / DS-1275ZJ-SUS (Black) |
| Corner mount | DS-1276ZJ-SUS / DS-1276ZJ-SUS (Black) |
| Junction box | DS-1280ZJ-XS / DS-1280ZJ-XS (Black) |
| Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.
8 MP AcuSense with DarkFighter and built-in microphone
DS-2CD2086G2H-IU combines 8 MP / 4K resolution with a large 1/1.8" image sensor, F1.0 aperture, and DarkFighter. This makes the camera well suited for locations where you want both plenty of detail and good images in difficult lighting conditions. At the same time, you get AcuSense for classifying people and vehicles, plus a built-in microphone so sound can be recorded together with the video.
8 MP delivers a detailed 4K image
The camera has a maximum resolution of 3840 × 2160 pixels, which corresponds to 8 MP / 4K. The high resolution provides lots of image detail and gives you great opportunities to see smaller details in recordings.
At 50 Hz, the camera can deliver up to 25 frames per second at full 4K resolution. This makes the camera well suited for general video surveillance where both overview and detail matter.
AcuSense focuses on people and vehicles
Hikvision AcuSense uses Deep Learning to classify people and vehicles. This means the camera can focus alarms on the target types that are usually most relevant in video surveillance.
For example, it can be used at a driveway, around a building, or in another monitored area where you mainly want to react to people and vehicles.
Line crossing and monitoring specific areas
DS-2CD2086G2H-IU supports line crossing, intrusion, region entrance, and region exiting. These functions can trigger alarms based on the specified target types: people and vehicles.
For example, you can create a virtual line at a driveway or gate and register when a person or vehicle crosses it. You can also define a specific area and register relevant targets when they move into or out of the area.
DarkFighter for very low light
DarkFighter is Hikvision’s technology for surveillance in very low light conditions. DS-2CD2086G2H-IU is specified down to 0.0008 lux in color at F1.0.
The camera’s large 1/1.8" image sensor and bright F1.0 aperture help make use of the available light. This is an advantage in places where, for example, there is only a little light from outdoor lighting or other light sources.
When there is no longer enough light, the camera can switch to black and white and use the built-in IR illumination.
Built-in microphone
The IU version has a built-in microphone, so sound can be recorded together with the video without needing a separate microphone.
The camera also supports filtering out background noise. This is practical in places where you want both picture and sound as part of the recording.
Up to 40 meters of IR in the dark
The camera has built-in 850 nm IR illumination with a range of up to 40 meters. This means the camera can continue monitoring in complete darkness, where the IR illumination is used to create a black-and-white image.
Smart Supplement Light helps control the camera’s supplementary IR illumination.
Choose between 2.8 mm and 4 mm lens
DS-2CD2086G2H-IU is available with either a 2.8 mm or 4 mm fixed lens. The main difference is how wide an area the camera shows.
2.8 mm provides an approximate 105° horizontal field of view and is the wider of the two versions. It is a great fit for entrances, terraces, courtyards, and other areas where you want a broad overview.
4 mm provides an approximate 90° horizontal field of view. Here, the image becomes more focused forward, which can be an advantage at driveways, gates, and passageways.
Better image in challenging backlight
The camera handles areas with both strong light and dark sections, giving you a more balanced image in situations such as backlight. This can be relevant at an entrance with daylight in the background or in an outdoor area where parts of the image are in sun and others in shade.
The camera also supports BLC, HLC, and 3D DNR for further image adjustment.
Face Capture
DS-2CD2086G2H-IU supports Face Capture, so the camera can detect faces in the image and take pictures of them when they are detected.
Face Capture should not be confused with facial recognition. The datasheet lists Face Capture, but not identification of specific people against a face database.
How far can the camera see?
The DORI values provide a standardized indication of how far from the camera different levels of detail can be expected in the image.
With 2.8 mm, the values are approximately 89 meters for Detect, 35 meters for Observe, 17 meters for Recognize, and 8 meters for Identify.
With 4 mm, the values are approximately 109 meters for Detect, 43 meters for Observe, 21 meters for Recognize, and 10 meters for Identify.
DORI describes the level of detail in the image and should not be confused with the camera’s IR range, which is up to 40 meters.
Supports SD cards up to 512 GB
DS-2CD2086G2H-IU supports SD cards up to 512 GB, so recordings can be stored directly in the camera. The camera also supports network storage via NAS.
This gives you the option of using local storage in the camera or combining the camera with other forms of network-based recording.
H.265+ reduces storage use
The camera supports H.265+, H.265, H.264+, and H.264. H.265+ is designed to reduce the amount of video data that needs to be stored and transmitted over the network.
This is especially relevant with an 8 MP camera, since the high resolution would otherwise require more storage space and bandwidth.
PoE makes installation easier
DS-2CD2086G2H-IU can be powered by either 12 V DC or PoE according to IEEE 802.3af. When using PoE, both power and network data can be carried through the same network cable.
This usually means that only one cable needs to be run to the camera when it is connected to a compatible PoE switch or PoE recorder.
Metal housing and IP67
The camera’s front, housing, and bracket are made of metal. The camera is IP67-rated and can be used both indoors and outdoors at temperatures from -30 °C to +60 °C.
The datasheet states that the model does not have special corrosion protection. The camera is therefore intended for areas where no special corrosion protection is required.
Accessories
Under the accessories tab, you can see which brackets and accessories fit this model.
Technical key points
- Manufacturer: Hikvision
- Model: DS-2CD2086G2H-IU
- Camera type: Mini bullet network camera
- Technology: AcuSense and DarkFighter
- Sensor: 1/1.8" Progressive Scan CMOS
- Resolution: 8 MP / 4K
- Max. resolution: 3840 × 2160 pixels
- Frame rate at 50 Hz: Up to 25 fps at 3840 × 2160
- Lens: Fixed 2.8 mm or 4 mm
- Horizontal field of view 2.8 mm: 105.1°
- Horizontal field of view 4 mm: 90°
- Aperture: F1.0
- Light sensitivity: Down to 0.0008 lux in color
- IR: 850 nm, up to 40 meters
- AcuSense: Classification of people and vehicles
- Perimeter protection: Line crossing, intrusion, region entrance, and region exiting
- Face Capture: Yes
- Built-in microphone: Yes
- Noise filtering: Yes
- WDR: 120 dB
- DORI 2.8 mm: 89 / 35 / 17 / 8 meters
- DORI 4 mm: 109 / 43 / 21 / 10 meters
- Video compression: H.265+, H.265, H.264+, and H.264
- Storage: SD cards up to 512 GB and NAS
- Network: RJ45 10/100
- Power supply: 12 V DC or PoE 802.3af
- Max. power consumption: 7 W at 12 V DC / 8.5 W via PoE
- Material: Metal
- Protection: IP67
- Operating temperature: -30 °C to +60 °C
- Dimensions: Ø74.4 × 179.2 mm
- Weight: Approx. 525 g
Power over Ethernet
ANR
If there are network problems, the camera stores the recordings on an SD- card - and then sends them to the recorder when the connection is stable again.
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.