Hikvision DS-2CD2746G2HT-IZS 4 MP dome camera with motorized zoom and person and vehicle detection
4 MP dome camera with 2.8-12 mm motorized zoom, strong performance in low light, and person and vehicle detection.
- 4 MP resolution with up to 2688 × 1520 pixels
- 2.8-12 mm motorized zoom to adjust the field of view
- Good image quality in very low light
- Detects and classifies people and vehicles
- IR illumination with a range of up to 40 meters
- Audio input and output for external audio equipment
- 1 alarm input and 1 alarm output
- Supports SD cards up to 512 GB
- IP67 weather protection and IK10 vandal resistance
- Power supply via PoE or 12 V DC
Hikvision DS-2CD2746G2HT-IZS is a 4 MP dome camera with motorized zoom and person and vehicle detection. The camera has audio and alarm connections as well as the option to record to an SD card.
You can control the camera from your mobile phone, tablet, or PC.
| Technical specifications | |
| Model | DS-2CD2746G2HT-IZS |
| Camera type | 4 MP AcuSense Powered-by-DarkFighter motorized varifocal dome network camera |
| Image sensor | 1/3" Progressive Scan CMOS |
| Maximum resolution | 2688 × 1520 |
| Minimum illumination | Color: 0.001 lux @ F1.0, AGC on; B/W: 0 lux with IR |
| Shutter time | 1/3 s to 1/100,000 s |
| Day / night | IR cut filter |
| Wide Dynamic Range | 120 dB WDR |
| Signal-to-noise ratio | ≥52 dB |
| Angle adjustment | Pan: 0–355°; tilt: 0–75°; rotation: 0–355° |
| Lens and illumination | |
| Lens type | Motorized varifocal lens |
| Focal length | 2.8–12 mm |
| Field of view | Horizontal: 105.4–34.3°; vertical: 56.1–19.3°; diagonal: 125.8–39.4° |
| Lens mount | Ø14 |
| Iris type | Fixed |
| Aperture | F1.0 |
| Depth of field | 1 m to ∞ |
| Supplement light | IR |
| IR range | Up to 40 m |
| IR wavelength | 850 nm |
| Smart Supplement Light | Yes |
| DORI | |
| Wide | Detect: 63.4 m; observe: 25.2 m; recognize: 12.7 m; identify: 6.3 m |
| Tele | Detect: 180.6 m; observe: 71.7 m; recognize: 36.1 m; identify: 18.1 m |
| Video | |
| Main stream, 50 Hz | 25 fps at 2688 × 1520, 1920 × 1080 or 1280 × 720 |
| Main stream, 60 Hz | 30 fps at 2688 × 1520, 1920 × 1080 or 1280 × 720 |
| Sub stream, 50 Hz | 25 fps at 1280 × 720, 640 × 480 or 640 × 360 |
| Sub stream, 60 Hz | 30 fps at 1280 × 720, 640 × 480 or 640 × 360 |
| Third stream | 10 fps at 1920 × 1080, 1280 × 720, 640 × 480 or 640 × 360; supported under certain settings |
| Main stream compression | H.265, H.264, H.264+ and H.265+ |
| Sub stream compression | H.265, H.264 and MJPEG |
| Third stream compression | H.265 and H.264; supported under certain settings |
| Video bit rate | 32 Kbps to 8 Mbps |
| H.264 profiles | Baseline Profile, Main Profile and High Profile |
| H.265 profile | Main Profile |
| Bit rate control | CBR / VBR |
| Scalable Video Coding | H.264 and H.265 encoding |
| Region of Interest | 1 fixed region for main stream and sub stream |
| Image processing | |
| Day / night modes | Day, night, auto or schedule |
| Image enhancement | BLC, HLC and 3D DNR |
| Image settings | Rotate mode, saturation, brightness, contrast, sharpness, gain and white balance |
| Image parameter switch | Yes |
| Privacy masks | 4 programmable polygon privacy masks |
| Additional functions | Heartbeat, mirror, password reset via email, pixel counter and anti-banding |
| AcuSense and intelligent functions | |
| Technology | AcuSense with deep-learning based human and vehicle classification |
| Face capture | Yes |
| Perimeter protection | Line crossing, intrusion, region entrance and region exiting detection |
| Target classification | Human and vehicle |
| Basic events | Motion detection with human and vehicle target classification, video tampering alarm and exception detection |
| Smart event | Scene change detection |
| Event linkage | Upload to FTP, NAS or memory card; notify surveillance center; send email; trigger alarm output, recording or capture; audible warning |
| Audio and alarm | |
| Audio input | 1 × line input, two-core terminal block; maximum input amplitude: 3.3 Vpp; input impedance: 4.7 kΩ; non-equilibrium interface |
| Audio output | 1 × line output, two-core terminal block; maximum output amplitude: 3.3 Vpp; output impedance: 100 Ω; non-equilibrium interface |
| Alarm input | 1 |
| Alarm output | 1, maximum 24 VDC / 24 VAC, 1 A |
| Environmental noise filtering | Yes |
| Audio sampling rate | 8 / 16 / 32 / 44.1 / 48 kHz |
| Audio compression | G.711 μ-law, G.711 A-law, G.722.1, G.726, MP2L2, PCM, MP3 and AAC-LC |
| Audio bit rate | 64 Kbps (G.711); 16 Kbps (G.722.1/G.726); 16–64 Kbps (AAC-LC); 32–192 Kbps (MP2L2); 8–320 Kbps (MP3) |
| Network and storage | |
| Ethernet | 1 × RJ45 10/100 Mbps self-adaptive Ethernet port |
| ONVIF | Profile S, Profile G and Profile T |
| API | ONVIF, ISAPI, SDK and ISUP |
| Network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, SNMP, WebSocket, WebSockets, SRTP and SFTP |
| Simultaneous live view | Up to 6 channels |
| Users | Up to 32 users; administrator, operator and user levels |
| On-board storage | MicroSD / microSDHC / microSDXC card, up to 512 GB |
| Network storage | NAS via NFS or SMB/CIFS with Auto Network Replenishment (ANR) |
| Security | Password protection, complicated password, HTTPS encryption, 802.1X authentication, watermark, IP address filtering, HTTP/HTTPS authentication, WSSE and digest authentication for ONVIF, RTP/RTSP over HTTPS, control timeout settings, security audit log, TLS 1.1/1.2/1.3 and MAC address host authentication |
| Client software | iVMS-4200, Hik-Connect and Hik-Central |
| Reset key | Yes |
| Power and environment | |
| Power supply | 12 VDC ±25% or PoE |
| 12 VDC power consumption | 0.88 A, maximum 10.5 W |
| Power connector | Ø5.5 mm coaxial power plug with reverse polarity protection |
| PoE | IEEE 802.3af, Class 3 |
| Maximum PoE power consumption | 12.5 W |
| Operating temperature | -30 °C to +60 °C |
| Storage temperature | -30 °C to +60 °C |
| Humidity | ≤95%, non-condensing |
| Ingress protection | IP67 |
| Impact protection | IK10 |
| Anti-corrosion protection | No specific protection |
| Physical specifications | |
| Material | Metal |
| Dimensions | Ø141 × 112 mm |
| Weight | Approx. 820 g |
| Package dimensions | 203 × 203 × 230 mm |
| Weight with package | Approx. 1450 g |
| Compliance | |
| EMC | CE-EMC, IC and RCM |
| Safety | CB and CE-LVD |
| Environmental compliance | CE-RoHS, WEEE and REACH |
| Available model | |
| Lens | DS-2CD2746G2HT-IZS, 2.8–12 mm |
| Compatible accessories | |
| Junction box | DS-1280ZJ-DM45 / DS-1280ZJ-DM45 (Black) |
| Wall mounts | DS-1273ZJ-140-DM45, DS-2200ZJ-WA-140, DS-2200ZJ-WAJ-140 |
| Pendant mounts | DS-1271ZJ-140-DM45, DS-2210ZJ-WA-140 |
| Vertical pole mount | DS-1275ZJ-SUS |
| Corner mount | DS-1276ZJ-SUS |
| Additional junction box | DS-2280ZJ-WA140 |
| Black accessories | DS-1273ZJ-140-DM45 (Black), DS-1271ZJ-140-DM45 (Black), DS-1275ZJ-SUS (Black), DS-1276ZJ-SUS (Black) |
| Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.
4 MP dome camera with DarkFighter and motorized zoom
DS-2CD2746G2HT-IZS is a professional dome camera with 4 MP resolution, bright F1.0 optics, and Hikvision DarkFighter technology. This combination delivers exceptionally good images in areas with limited lighting, where ordinary cameras often lose detail.
The camera is ideal for businesses, warehouses, institutions, housing associations, shops, and other areas where high image quality is required around the clock.
DarkFighter technology for surveillance in very low light
The camera uses Hikvision DarkFighter technology, which is designed for surveillance in challenging lighting conditions.
The large F1.0 aperture and sensitive image sensor capture more light than traditional cameras. The result is brighter images with more detail at dusk, in dark areas, and during nighttime surveillance.
Motorized zoom makes installation easier
The camera is equipped with a motorized 2.8 to 12 mm varifocal lens.
This means you can adjust the viewing angle and zoom directly from the recorder or via software without having to open the camera physically.
At 2.8 mm, you get a wide overview of the area, while 12 mm lets you focus on specific access roads, gates, or driveways.
AcuSense person and vehicle detection
The camera uses Hikvision AcuSense technology, which can distinguish between people, vehicles, and other motion in the image.
This reduces the number of unnecessary alarms from rain, shadows, leaves, and other natural movement. You get more relevant notifications and faster searching in recordings.
Advanced video analytics directly in the camera
The camera analyzes events directly in the camera without the need for an external server or analytics unit.
This provides fast event detection and less load on the rest of the surveillance system.
Line crossing
You can create virtual lines in the image and receive an alarm when people or vehicles cross them.
This function is often used at driveways, gates, access roads, and restricted areas.
Intrusion detection
The camera can monitor a marked area and react when people or vehicles enter the zone.
This makes the function ideal for securing courtyards, warehouse areas, parking areas, and other spaces with limited access.
Entry and exit detection
The camera can detect when people or vehicles enter or leave a specific area.
It can be used for monitoring access roads, gates, and areas with controlled traffic.
Face detection
The camera supports face detection and can detect faces when people pass through the camera’s field of view.
This function can be used for faster searching in recordings and documenting events.
Up to 40 m IR night illumination
The integrated infrared illumination makes it possible to monitor areas with limited or no lighting.
The IR range is up to 40 meters, providing clear images in dark environments.
Audio input and output
The camera is equipped with both audio input and audio output.
This makes it possible to connect an external microphone, speaker, or other audio devices if the installation requires it.
Alarm input and output
There is both an alarm input and an alarm output, so the camera can be integrated with, for example, door contacts, sensors, sirens, or other security systems
.
Supports SD card
The camera supports microSD cards up to 512 GB.
Recordings can be stored directly in the camera or used as an additional backup together with a network recorder.
IP67 and IK10 protection
The camera is suitable for both indoor and outdoor installation.
IP67 protects against dust and rain, while the IK10 rating protects the camera against impact and vandalism.
Accessories
Under the accessories tab, you can see which mounts and accessories are compatible.
Technical key points
- Model: DS-2CD2746G2HT-IZS
- Resolution: 4 MP (2688 × 1520)
- Image sensor: 1/3" Progressive Scan CMOS
- Motorized varifocal lens: 2.8-12 mm
- DarkFighter technology
- AcuSense person and vehicle detection
- Face detection
- Line crossing
- Intrusion detection
- Entry and exit detection
- IR range up to 40 meters
- 120 dB WDR
- Alarm in: 1
- Alarm out: 1
- Audio in and out
- Supports SD cards up to 512 GB
- PoE or 12 V DC
- IP67 and IK10 rated
- Metal housing
Power over Ethernet
ANR
If there are network problems, the camera stores the recordings on an SD- card - and then sends them to the recorder when the connection is stable again.
Face Capture
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.