Hikvision Micro AcuSense Kit
Complete small kit for the company, the house, the cottage, the barn, etc., The package contains 1 Camera, 1 PoE Injector and 1 SD card.
The camera is one of the best at sorting out unwanted messages due to AcuSense technology - it is clearly one of the best cameras we have tested to date.
Note this model is without speaker, strobe light and microphone, if the camera needs a speaker / microphone, then you should choose this instead: https://ipcam-shop.dk/hikvision-38/hikvision-ds-2cd2346g2-isu-sl -4mp-4mm-acusense-poe-p2821
See an extended product review here: https://ipcam-shop.dk/information/ds-2cd2346g2-isu-sl/
This complete set contains everything you need to get started. The surveillance camera is from the AcuSense family from Hikvision, which means that it is particularly suitable for giving you messages on the phone. As you can see in the video below, it is the camera's specialty to make sure you do not get false alarms. (continued during the video ...)
Hikvision's product film
The camera can withstand sitting both inside and out, as it is IP67 approved, as long as you also mount the included membrane. The SD card is mounted in the camera, which is opened with the included tool. There are also screws, raw plugs and a drilling template that are easily glued to the concrete or bricks so you know exactly where to drill. The camera can be mounted in all directions, just like a 3-axis camera. Once the SD card is inserted, the camera records the video directly onto the card and it can be played directly from the APP, so you do not have to take it out. The camera can monitor the health status of the SD card.
If you need a bracket (back box) for the camera, look here: https://ipcam-shop.dk/hikvision-38/hikvision-ds-1280zj-dm21-beslag-p734
Should your DS-2CD2346G2-I be mounted on a mast, you must also use this bracket: https://ipcam-shop.dk/beslag-47/hikvision-ds-1275zj-sus-mastebeslag-p2399
Even though the camera is intelligent, it still needs some input from you. When the camera is mounted, you can choose between several types of "smart events" including "Detection of intrusion" where a square is drawn in the image and when a target moves into the square and stays longer than you have allowed (1 -10 seconds) your "reaction" is triggered. There are also line intersections where detectors about a "target" move across the line you have drawn. It can be both ways or just one way. It can e.g. is used for one-way roads, so that an alarm is given when driving in the opposite direction or in a driveway so that you are only notified when people arrive, but not when they leave.
What is a reaction? The event that is triggered when a rule is violated is called a "reaction". Depending on which model is chosen, you have different options.
Most used "reactions":
- Push message on mobile (get a picture sent directly to your phone, of the target that has broken the rule, with a link to direct play in APP)
- Send email (this feature should be used with caution as the mail provider may close your account for suspected spamming if too many photos are sent)
- Flashing white light *
- Warning sound * (siren or voice warning - it is also possible to record your own messages)
- Alarm output * (open a garage door, turn on lights, send signal to your alarm system, interact with IHC, etc.)
* These functions are only supported by the ISU / SL models, as this https://ipcam-shop.dk/hikvision-38/hikvision-ds-2cd2346g2-isu-sl-4mp-4mm-acusense-poe-p2821
The camera is also made in a 4K version, which has a resolution that is twice as high: https://ipcam-shop.dk/hikvision-38/hikvision-ds-2cd2386g2-isu-sl-8mp-acusense-poe- p2743
If the camera is connected to a newer recorder, you can also make "combined" reactions. This means that another given rule must be broken before the "reaction" is triggered. (AND logic). In practical terms, this means that one e.g. can "combine" with an "alarm input" so that the camera only sends messages if the alarm is turned on or a motion sensor is triggered. In this way, the system can be integrated into the building's systems.
You can, among other things, use this NVR: https://ipcam-shop.dk/acusense-277/hikvision-ds-7608nxi-i2-s-8-channel-ip-acusense-nvr-p3055
The SD card is inserted into the Acusense camera and the camera is connected with a network cable to the PoE injector, thus supplying power to the camera directly through the network cable. There is room for 2 network cables in the PoE injector, one is for the camera and the other is for your router so that the camera can connect to the Internet (It is not a requirement that the camera is connected to the router, but it is necessary to be able to use the camera on APP).
NB: REMEMBER TO CHOOSE NETWORK CABLES IF YOU DON'T HAVE ANY BEFORE YOU HAVE TO USE TWO, ONE FAR FROM THE CAMERA AND INTO THE POE INJECTOR WHICH IS TYPICALLY INSERTED BY THE ROUTER AND ROUTER IN A ROUTER. CHOOSE CABLE!
For more information, please visit this product's webpage.
There is no reviews yet. Be the first to write us your opinion
AnyDesk can only receive incoming sessions when Accessibility and Screen Recording permissions are granted by the macOS system.
Add AnyDesk to trusted apps in order to work correctly.
AnyDesk requires security permissions from macOS for remote input, screen recording and disc access.
- Click Configure to open the macOS system preferences and set permissions for AnyDesk accordingly.
- Click Open System Preferences to open Security & Privacy
- Unlock Security & Privacy by clicking the lock icon.
- Switch to the Privacy tab.
- Grant required permissions by adding AnyDesk to trusted apps in section Accessibility, Full Disk Access, and Screen Recording.
Note: Permission for Full Disk Access is optional, but is required to use the File Transfer Mode.