Hikvision DS-2CD2346G2H-IS2U/SL 4MP AcuSense Turret with microphone and speaker
Intelligent camera with lots of great features
- 4 megapixel image sensor that delivers a great daytime image
- Invisible IR light with a range of up to 30 meters ensures a great nighttime image
- AcuSense enables the camera to detect people & vehicles
- Strobe can flash as a warning light & speaker can play siren sounds or voice messages
- Two microphones that ensure good sound and make it possible to record audio and hear sound in live view
- Suitable for outdoor use, as it requires very little cleaning
Get push notifications on your mobile - and access to video directly from your smartphone or from PC/tablet.
| Technical specifications | |
| Model | DS-2CD2346G2H-IS2U/S(L)(RB) |
| Camera type | 4 MP AcuSense strobe light and audible warning fixed turret network camera |
| Image sensor | 1/3" Progressive Scan CMOS |
| Maximum resolution | 2688 × 1520 |
| Minimum illumination | Color: 0.001 lux @ F1.0, AGC on; B/W: 0 lux with IR |
| Shutter time | 1/3 s–1/100,000 s |
| Day / night | IR cut filter |
| Wide Dynamic Range | 120 dB |
| Signal-to-noise ratio | ≥52 dB |
| Angle adjustment | Pan: 0–360°; tilt: 0–75°; rotation: 0–360° |
| Lens and illumination | |
| Lens type | Fixed focal lens |
| Lens options | 2.8 mm or 4 mm |
| Lens mount | M12 |
| Iris type | Fixed |
| Aperture | F1.0 |
| Field of view, 2.8 mm | Horizontal: 100°; vertical: 55°; diagonal: 120° |
| Field of view, 4 mm | Horizontal: 81°; vertical: 45°; diagonal: 95° |
| Depth of field, 2.8 mm | 1.9 m to ∞ |
| Depth of field, 4 mm | 2.5 m to ∞ |
| Supplement light | IR |
| IR range | Up to 30 m |
| IR wavelength | 850 nm |
| Smart Supplement Light | Yes |
| DORI | |
| 2.8 mm lens | Detect: 63 m; observe: 25 m; recognize: 12 m; identify: 6 m |
| 4 mm lens | Detect: 78 m; observe: 31 m; recognize: 15 m; identify: 7 m |
| Video | |
| Main stream | 50 Hz: up to 25 fps at 2688 × 1520, 1920 × 1080 or 1280 × 720; 60 Hz: up to 30 fps at 2688 × 1520, 1920 × 1080 or 1280 × 720 |
| Sub stream | 50 Hz: up to 25 fps at 1280 × 720, 640 × 480 or 640 × 360; 60 Hz: up to 30 fps at 1280 × 720, 640 × 480 or 640 × 360 |
| Third stream | Up to 10 fps at 1920 × 1080, 1280 × 720, 640 × 480 or 640 × 360; supported under certain settings |
| Main stream compression | H.265, H.264, H.264+ and H.265+ |
| Sub stream compression | H.265, H.264 and MJPEG |
| Third stream compression | H.265 and H.264; supported under certain settings |
| Video bit rate | 32 kbps–8 Mbps |
| H.264 profiles | Baseline Profile, Main Profile and High Profile |
| H.265 profile | Main Profile |
| Bit rate control | CBR / VBR |
| Scalable Video Coding | H.264 and H.265 encoding |
| ROI | 1 fixed region for main stream and sub stream |
| Image | |
| Day / night modes | Day, night, auto or schedule |
| Image enhancement | BLC, HLC, 3D DNR and Defog |
| Image settings | Rotate mode, saturation, brightness, contrast, sharpness, gain and white balance |
| Privacy masking | 4 programmable polygon privacy masks |
| Image parameter switch | Yes |
| AcuSense and intelligent functions | |
| AcuSense | Deep-learning-based human and vehicle classification |
| Motion detection | Supports alarm triggering by specified target types: human and vehicle |
| Perimeter protection | Line crossing detection, intrusion detection, region entrance detection and region exiting detection |
| Perimeter target filtering | Supports alarm triggering by specified target types: human and vehicle |
| Face capture | Yes |
| Scene change detection | Yes |
| Additional events | Video tampering alarm and exception detection |
| Active deterrence | |
| Active warning | Strobe light and audible warning |
| Flashing light, /SL models | White light |
| Flashing light, /SRB models | Red and blue light |
| Linkage methods | Upload to FTP, NAS or memory card; notify surveillance center; send email; trigger alarm output; trigger recording; trigger capture; audible warning; strobe light |
| Audio and alarm | |
| Two-way audio | Yes |
| Built-in microphones | 2 |
| Built-in speaker | Maximum power consumption: 2 W; maximum sound pressure level: 105 dB at 10 cm |
| Audio type | Mono |
| Audio input | 1 × line input, two-core terminal block; maximum input amplitude: 3.3 Vpp; input impedance: 4.7 kΩ; non-equilibrium interface |
| Audio output | 1 × line output, two-core terminal block; maximum output amplitude: 3.3 Vpp; output impedance: 100 Ω; non-equilibrium interface |
| Environmental noise filtering | Yes |
| Audio sampling rate | 8 kHz, 16 kHz, 32 kHz or 48 kHz |
| Audio compression | G.711, G.722.1, G.726, MP2L2, PCM, MP3 and AAC-LC |
| Audio bit rate | 64 kbps (G.711ulaw/G.711alaw); 16 kbps (G.722.1); 16 kbps (G.726); 32–192 kbps (MP2L2); 8–320 kbps (MP3); 16–64 kbps (AAC-LC) |
| Alarm input | 1 |
| Alarm output | 1, maximum 24 VDC / 24 VAC, 1 A |
| Network and storage | |
| Ethernet interface | 1 × RJ45 10/100 Mbps self-adaptive Ethernet port |
| ONVIF | Profile S, Profile T and Profile G |
| API | ONVIF, ISAPI, SDK and ISUP |
| Network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv4, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, SNMP, WebSocket, WebSockets, SRTP and SFTP |
| Simultaneous live view | Up to 6 channels |
| Users | Up to 32 users; administrator, operator and user levels |
| Security | Password protection, complicated password, HTTPS encryption, 802.1X authentication (EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for ONVIF, RTP/RTSP over HTTPS, control timeout settings, security audit log, TLS 1.1/1.2/1.3 and host authentication by MAC address |
| On-board storage | MicroSD / microSDHC / microSDXC card, up to 512 GB |
| Network storage | NAS via NFS or SMB/CIFS |
| ANR | Auto Network Replenishment supported |
| Client software | iVMS-4200 and Hik-Connect |
| Reset key | Yes |
| Power and environment | |
| Power supply | 12 VDC ±25%, 1.34 A, reverse polarity protection |
| Maximum power consumption, 12 VDC | 16 W |
| Power interface | Ø5.5 mm coaxial power plug |
| PoE | IEEE 802.3at, Class 4 |
| Maximum power consumption, PoE | 18 W |
| Operating temperature | -30 °C to +60 °C |
| Storage temperature | -30 °C to +60 °C |
| Humidity | ≤95%, non-condensing |
| Ingress protection | IP67 |
| Anti-corrosion protection | No specific protection |
| Physical specifications | |
| Cover material | Metal |
| Main body material | Metal |
| Dimensions | Ø138.3 × 115.4 mm |
| Weight | Approx. 780 g |
| Available variants | |
| /SL | White strobe light; 2.8 mm or 4 mm lens; 2.8 mm also available in black |
| /SRB | Red and blue strobe light; 2.8 mm or 4 mm lens; 2.8 mm also available in black |
| Compatible accessories | |
| Wall mounts | DS-1273ZJ-140, DS-1273ZJ-140B, DS-2200ZJ-WA-140, DS-2200ZJ-WAJ-140 |
| Pendant mounts | DS-1271ZJ-140, DS-2210ZJ-WA-140 |
| Vertical pole mount | DS-1275ZJ-SUS |
| Corner mount | DS-1276ZJ-SUS |
| Junction boxes | DS-1280ZJ-PT6, DS-2280ZJ-WA140 |
| Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.
One of the coolest and smartest cameras on the market
This surveillance camera is part of Hikvision’s AcuSense family, which means it’s especially well suited to sending you notifications on your phone about people and vehicles.
Watch the video showing how it works
As you can see in the video below, the camera’s specialty is distinguishing between people, vehicles, and uninteresting objects.
About the camera
The camera comes from Hikvision’s Turret series. These are cameras that are very robust and require very little maintenance. It is made of metal and is very durable, making it vandal-resistant. The camera is IP67-rated, which means it can withstand harsh weather and can be used both indoors and outdoors.
The camera has 3 axes and is therefore very easy to install, as it can be mounted on vertical, horizontal, and angled surfaces.
Human and vehicle detection (Acusense)
Even though the camera is intelligent, it still needs some input from you. Once the camera is installed, you can choose between several types of "smart events", including "intrusion detection", where a box is drawn in the image and when a target moves into the box and remains there longer than you allow (1-10 seconds), your "reaction" is triggered.
There is also line crossing, which detects whether a "target" moves across the line you have drawn. This can be set for both directions or just one. It can, for example, be used for one-way roads, so an alarm is triggered if someone drives the wrong way, or at a driveway so you only get a notification when people arrive, not when they leave.
What is a reaction? The event that is triggered when a rule is violated is called a "reaction". Depending on the model chosen, you have different options.
Most commonly used "reactions":
- Push notification on your mobile (receive an image directly on your phone of the target that broke the rule, with a link to direct playback in the app)
- Send email (use this function with caution, as the mail provider may close your account for suspected spamming if too many images are sent)
- Flash white light
- Warning sound (siren or voice warning - it is also possible to record your own messages)*
- Alarm output (open a garage door, switch on lights, send a signal to your alarm system, interact with IHC, etc.)
To have all functions, choose the models where the model number ends with IS2U/SL
Which Acusense cameras do what?
The model name tells you which features the camera has if it ends with:
- DS-2CDXXX6G2H-I = Standard with infrared night vision
- DS-2CDXXX6G2H-IU= With infrared night vision and one microphone
- DS-2CDXXX6G2H-ISU = With infrared night vision, one microphone, alarm input and output
- DS-2CDXXX6G2H-IS2U/SL = With infrared night vision, dual microphone, alarm input and output, as well as white strobe light and speaker
IP67 rated
The camera is IP67-rated. This means it can withstand all kinds of weather. The camera can be used both indoors and outdoors.
- Dust-tight (6): Full protection against dust.
- Waterproof against immersion (7): Can withstand temporary immersion in water up to 1 meter deep for up to 30 minutes.
Supports micro-SD cards
The camera can take a micro-SD card up to 512GB
(SD card (memory card not included, but can be purchased here).
About the lens
The camera is available with several lenses, and the lens affects the "FOV" (Field Of View), or in Danish: viewing angle.
A 2.8 mm lens gives a horizontal FOV of 100°, vertical FOV of 55° and diagonal FOV of 120°
A 4 mm lens gives a horizontal FOV of 81°, vertical FOV of 45° and diagonal FOV of 95°
Installation
The camera is very easy to install and can be mounted directly on a wall or in a ceiling/eave. A back box/bracket may be required if the connection cannot be placed behind the wall, ceiling, or eave.
Under accessories, you can see which brackets fit.
Technical key points
- Manufacturer: Hikvision
- Model: DS-2CD2346G2H-IS2U/SL
- Camera type: Fixed turret network camera
- Technology: AcuSense
- Sensor: 1/3" Progressive Scan CMOS
- Resolution: 4 MP
- Max. resolution: 2688 × 1520 pixels
- Frame rate: Up to 25/30 fps at full resolution
- Lens: Fixed 2.8 mm or 4 mm
- Horizontal viewing angle 2.8 mm: 100°
- Horizontal viewing angle 4 mm: 81°
- Aperture: F1.0
- Light sensitivity: Down to 0.001 lux in color
- IR: 850 nm, up to 30 meters
- Warning light /SL: White light
- Person and vehicle classification: Yes
- Perimeter protection: Line crossing, intrusion, region entrance and region exiting
- Face Capture: Yes
- Built-in microphones: 2 pcs.
- Built-in speaker: Yes, max. 2 W
- Max. speaker sound pressure: 105 dB at 10 cm
- Two-way communication: Yes
- External audio: 1 × line-in and 1 × line-out
- Alarm: 1 input and 1 output
- WDR: 120 dB
- DORI 2.8 mm: 63 / 25 / 12 / 6 meters
- DORI 4 mm: 78 / 31 / 15 / 7 meters
- Video compression: H.265+, H.265, H.264+ and H.264
- Storage: SD card up to 512 GB and NAS
- Network: RJ45 10/100
- Power supply: 12 V DC or PoE+ 802.3at
- Max. power consumption: 16 W at 12 V DC / 18 W via PoE+
- Material: Metal
- Protection: IP67
- Corrosion protection: No special protection
- Operating temperature: -30 °C to +60 °C
- Dimensions: Ø138.3 × 115.4 mm
- Weight: Approx. 780 g
Power over Ethernet
ANR
If there are network problems, the camera stores the recordings on an SD- card - and then sends them to the recorder when the connection is stable again.
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.