UNV megabit switch PoE 8+2 30/88W (unmanaged)
10-port PoE switch with 8 PoE ports, 88W total power, and up to 250 meters of range.
- 8 PoE ports for IP cameras and other PoE equipment
- 2 extra network ports for recorder or network
- Total PoE budget of 88W
- Up to 30W per PoE port
- Extend function with up to 250 meters of cable connection
- Normal mode and Extend mode for surveillance
- Plug & Play with no configuration needed
- Network traffic prioritization on ports 1 and 2
- Fanless design with no fan noise
- Compact metal housing
A practical solution for surveillance systems where you want to combine power and network connection for up to 8 compatible IP cameras in one switch.
| Datasheet | Quick Guide |
| Technical specifications | |
| Model | NSW2020-10T-POE-IN |
| Brand | Uniview |
| Product type | Unmanaged Ethernet PoE Switch |
| Total Ethernet ports | 10 × 10/100 Mbps RJ45 ports |
| PoE ports | 8 |
| Priority ports | Ports 1–2 |
| Maximum PoE power budget | 88 W |
| Maximum PoE power per port | 30 W |
| PoE standards | IEEE 802.3af, IEEE 802.3at |
| Switching capacity | 2 Gbps |
| Maximum transmission distance | 250 m in Extend (Surveillance) mode |
| Working modes | Default (Normal), Extend (Surveillance) |
| Housing | Metal |
| Cooling | Fanless |
| Hardware specifications | |
| Ethernet interfaces | 10 × RJ45 10/100 Mbps network ports |
| PoE-enabled interfaces | 8 × RJ45 ports |
| Priority ports | 1–2 |
| Switching capacity | 2 Gbps |
| Packet buffer | 448 Kbit |
| MAC address table | 1K entries |
| Packet forwarding rate | 1.49 Mpps |
| Port traffic control | Supported |
| Buffer optimization | Supported |
| Management type | Unmanaged |
| Cooling fans | 0 (fanless design) |
| Power over Ethernet (PoE) | |
| PoE support | Supported |
| Number of PoE ports | 8 |
| Maximum total PoE output | 88 W |
| Maximum PoE output per port | 30 W |
| PoE standard – IEEE 802.3af | Supported |
| PoE+ standard – IEEE 802.3at | Supported |
| PoE power budget monitoring | PoE-MAX status indicator |
| Operating modes | |
| Default mode | Normal mode: all ports can communicate with each other |
| Extend mode | Surveillance mode: transmission distance up to 250 m |
| Maximum transmission distance – Extend mode | 250 m |
| Application | PoE network connectivity for surveillance and other Ethernet devices |
| LED indicators | |
| POWER – Steady on | AC input is normal |
| POWER – Off | No AC input |
| PoE port indicators | No individual PoE indicator specified |
| PoE-MAX – Off | Total PoE power consumption is less than 80% of the specified PoE power budget |
| PoE-MAX – Steady on | Total PoE power consumption is greater than 85% of the specified PoE power budget |
| LINK/ACT – Off | No network link |
| LINK/ACT – Steady on | Network link established |
| LINK/ACT – Flashing | Data transmission in progress |
| Network standards | |
| IEEE 802.3 | Supported |
| IEEE 802.3u | Supported |
| IEEE 802.3az | Supported |
| IEEE 802.3x | Supported |
| IEEE 802.3af | Supported |
| IEEE 802.3at | Supported |
| Supported standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3az, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at |
| Power supply | |
| DC input | 48/51 V DC |
| Power source | External power adapter |
| Adapter AC input | 100–240 V AC, 50/60 Hz |
| Maximum power consumption | 94 W |
| Maximum PoE power budget | 88 W |
| Environmental specifications | |
| Operating temperature | 0 °C to +40 °C (+32 °F to +104 °F) |
| Storage temperature | -40 °C to +70 °C |
| Operating humidity | 10% to 90% RH (non-condensing) |
| Storage humidity | 5% to 90% RH (non-condensing) |
| Cooling method | Passive cooling, fanless |
| Physical specifications | |
| Dimensions (W × D × H) | 171 × 103 × 25 mm |
| Weight | 0.29 kg |
| Housing material | Metal |
| Cooling fans | 0 |
| Ordering information | |
| Product model | NSW2020-10T-POE-IN |
| Product description | Unmanaged Ethernet Switch (PoE) |
| Manufacturer | Zhejiang Uniview Technologies Co., Ltd. |
| Specifications and availability are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
PoE switch for 8 cameras
Uniview NSW2020-10T-POE-IN is a 10-port network switch with 8 PoE ports and 2 standard network ports.
It is designed for installations where several IP cameras need both power and network connection through a single cable. That means you do not need separate power supplies at each camera.
The switch is unmanaged and requires no programming. Connect the cameras, link the switch to your recorder or your network, and choose the desired operating mode.
8 PoE ports and 2 network ports
The 8 PoE ports can supply compatible surveillance cameras with both power and data.
The 2 remaining ports can, for example, be used to connect the switch to an NVR recorder and the existing network.
All 10 ports support 10/100 Mbps, which is well suited for many common IP cameras.
88W for your cameras
The switch has a total PoE budget of 88W and can deliver up to 30W on a single PoE port.
This means you can connect both standard PoE cameras and compatible PoE+ cameras, as long as their total power consumption stays within the 88W limit.
For example, 8 cameras using 8W each would use 64W in total, leaving room within the switch's overall PoE budget.
Extend function - up to 250 meters
Normally, a maximum cable length of 100 meters is recommended for standard Ethernet connections.
With the switch's Extend function, the transmission distance can be increased to up to 250 meters, which can be a big advantage in surveillance installations.
For example, this can be useful if you need to mount a camera at a gate, on a warehouse building, or somewhere else far from the technical room.
The Extend mode is intended for surveillance use. The actual range depends on factors such as cable quality, the connected equipment, and power consumption. The datasheet does not specify a particular speed for Extend mode.
Normal or Extend - choose according to the installation
The switch has two operating modes:
- Normal: All ports can communicate with each other. Used for standard network installations.
- Extend: Allows transmission distances of up to 250 meters and is intended for longer cable runs in video surveillance.
You can therefore choose the mode that fits the needs of the installation.
Traffic prioritization on ports 1 and 2
The switch supports network traffic prioritization on ports 1 and 2.
This can be useful when certain connections need to be prioritized, for example in a surveillance system with several cameras sending video at the same time.
Plug & Play without programming
Since the switch is unmanaged, you do not need to log in to an administration page or configure network settings.
That makes it easy to use for both smaller and larger camera setups, where you simply need to connect the equipment.
Fanless and compact
The switch has a metal housing and is built without a fan.
That means there is no fan noise, and it is well suited for placement in, for example, a technical cabinet, on a shelf, or in a smaller network area.
With dimensions of 171 x 103 x 25 mm, it does not take up much space.
Technical key points
- Model: Uniview NSW2020-10T-POE-IN
- Type: Unmanaged PoE switch
- Number of ports: 10 x RJ45 10/100 Mbps
- PoE ports: 8
- Standard network ports: 2
- PoE standards: IEEE 802.3af and IEEE 802.3at
- Total PoE budget: 88W
- Maximum PoE power per port: 30W
- Extend function: Up to 250 meters
- Operating modes: Normal and Extend
- Port prioritization: Ports 1 and 2
- Switching capacity: 2 Gbps
- Forwarding rate: 1.49 Mpps
- Packet buffer: 448 Kbit
- MAC addresses: 1,024
- Network standards: IEEE 802.3, 802.3u, 802.3az and 802.3x
- Power supply: 48/51V DC via adapter
- Adapter input: 100-240V AC, 50/60 Hz
- Maximum total power consumption: 94W
- Cooling: Passive, without fan
- Housing: Metal
- Operating temperature: 0 °C to +40 °C
- Operating humidity: 10-90% non-condensing
- Dimensions: 171 x 103 x 25 mm
- Weight: 290 g
