Jablotron detektorer

The JA-122PW is a combined PIR and microwave detector. The device is bus-based and is part of the JABLOTRON 100+ series. It can detect human movement inside and has a high degree of immunity to false alarms, due to the combination of microwave detection and PIR. In order for it to sound the alarm, the PIR activation must first be confirmed by the microwave detection. The gray lens that the detector is equipped with increases immunity to white light (up to 10,000 lux), which is far above the standard requirements. This thus lowers the risk of false alarms further, as things like car headlights and reflective surfaces do not interfere. You can choose between two levels of immunity, PIR and MW. The device takes up one space in the system, and also has a pulse response.

Technical specifications

JA-120PB is a BUS detector from Jablotron, with combined PIR and acoustic glass breakage. PIR sensor detects movement, while GBS sensor (glass breakage) analyzes changes in sound and air pressure. If desired, the detector can be optimized with alternative lenses from Jablotron: JS-7904, JS-7906 or JS-7901.

The detector must be registered in two consecutive zones in the system.

Technical specifications

JA-115P is a BUS-based 360 ° PIR ceiling detector. It can detect movement indoors and is different from the other motion detectors of the JABLOTRON 100 series, due to its increased immunity to pets and its modified detection characteristics. The unit is made for installation in the ceiling and has, when installed 3.5 m above the floor, 360 ° coverage with up to 5.5 m radius. It is possible to choose between two levels of detection sensitivity, depending on how high immunity to false alarms you want. In addition, the detector has a pulse response.

If it is not possible to hide the cable in the ceiling, you can use the PLV-P-ST mounting plate, for the same purpose.

The device takes up one space in the system.

With the JA-160PC you can detect human movement in a room and have this confirmed with an image. The image is taken in color and taken twice first in low (320x240 pixels), and then in high resolution (640 × 480 pixels). The camera can also take pictures in the dark, as it is equipped with flash. Once the pictures are taken, they are saved on the camera's internal micro SD card, and afterwards the image, low resolution, is sent on to the control panel.

The pictures can be seen in the event log, by using F-link or J-link. However, they are displayed in low resolution. If you want to see the image in higher resolution, it can be found under "details." It is also possible to send the images on from the exchange, to an external server, user or KC. It is also possible to send a picture from the MyJablotron website.

In addition, the detector can also take a picture when activating a PG output, due to fire, water damage or the like.

The detector can also be set up to take a pre-alarm picture, whereby a picture is sent at input time or if only one alarm has gone off.

It is possible to set the camera's immunity to false alarms on two levels. Either you can choose fast reaction time and basic immunity, otherwise you can choose a slower reaction time but with a higher degree of immunity.

Technical specifications

JA-162PW is a wireless combined PIR and microwave detector, and is part of the system "JABLOTRON 100+".

With this detector it is possible to detect human movement in a building. It is also well protected against false alarms, due to the combination of PIR and microwave detection (MW). The microwave detection is activated when the PIR detector detects movement, to confirm or deny whether a person is actually present in the monitored area.

The detector lens is white, and has standard immunity to white light cf. the norm (up to 6,000 lux). One can set the immunity to false alarms on two levels - PIR and MW. The detector takes up a space in the system, and makes use of pulse response.

This unit fits with the JA-103K and JA-107K control panels.

JA-162PW (G) is a wireless gray combined PIR and microwave detector from Jablotron's line "JABLOTRON 100+". With this device it is possible to detect human activity in a building. The detector is also good for avoiding false alarms, due to its clever combination of PIR and microwave detection. When the PIR detector detects motion, the microwave detection will be reset to confirm that someone is present in the monitoring area.

The detector lens is gray, and actually has an increased immunity to white light, which is far above the standard requirements (up to 10,000 lux). The reduction of false alarms is also helped along the way by this, eg light from car headlights, a sunset or reflective surfaces. It is possible to set the immunity against false alarms on two levels - PIR or MW. Note that the device occupies a space in the system, and also uses pulse response.

This unit is compatible with the JA-103K and JA-107K control panels.

Technical specifications

The JA-155P is part of the JABLOTRON 100+ system. It is a wireless device, for installation in the ceiling, which can detect human movement in a room, or in a building.

At a ceiling height of 3.5 m, the unit has guaranteed detection of 360 °, with a coverage area of up to 5.5 m radius. It is also possible to adjust the sensitivity of the device to false alarms, with two different settings. The device takes up space in the system and has a pulse response.

If you want to separate the antenna from the mounting surface and potentially improve the range, you can use mounting brackets PLV-P-ST.

Technical specifications

The JA-185P is a wireless mini 360 degree PIR detector. It is ideal for monitoring smaller spaces and cars - and can also be used with Jablotron's car alarms. And it is also popular as a ceiling detector in stores.

It is addressable and takes up space in the exchange.

Technical specifications

JA-186P (pet) is a wireless dual PIR detector 120 ° / 12m, is created for washable environments and makes it possible to have surveillance, even if you have animals in the house, for example. This is possible because it is a dual element detector, so both sensors must be triggered for an alarm to be triggered. Since the normal mounting height is 120 cm above the floor, the top sensor will avoid being triggered by pets. The coverage angle of the detector is 120 ° and the distance is 12 m. The height at which the PIR detector is mounted dictates the dividing line between the two PIR elements.

Note that the detector IS addressable and takes up space in the control panel.

JA-112M BUS is a module made for connecting wired magnets. The device both communicates and is supplied through the BUS cable. It is possible to set the unit for reverse input response and in addition, the time for activation at input can be adjusted (from 0.15 to 300 sec). The unit has two programmable and independent inputs NC, NO or balanced with resistors.

Note that the unit occupies two seats in the control panel.

JA-111M is a small BUS magnetic contact. It is quite suitable for both home and business, with its smart small size. It can be mounted on doors / windows where it responds to opening. It communicates with the exchange through BUS. In addition, the unit has a tamper switch on the lid, to prevent the unit from being opened inappropriately.

Note that the switch takes up one space in the control panel.

JA-110B BUS is a glass break detector that is supplied and communicates through the control panel's BUS. It detects broken glass with its dual detection technology that analyzes air pressure and sound. The sensitivity of the device is adjustable and it also has SMARTMEMORY function that provides LED indication of alarm. The function can be switched off if you prefer.

The detector takes up one space in the control panel.

Technical specifications

JA-111SH BUS is made to detect vibrations on doors / windows, caused by an external attempt to force itself through. It is possible to adjust the sensitivity of the detector, depending on the subject that requires protection. The detector has a tilt function so that it can also be used to secure works of art or safes, and can easily be mounted on things that must not be taken down without an alarm. You choose whether you want to use the device as a vibration detector or tilt detector, with a jumper.

Technical specifications

The JA-152NM is a wireless module that can be used to lock a door or window when the alarm is switched on, which it does by following a PG output integrated in a mechanical lock. For optimal operation, the handle must be locked in its normal position. However, the lock is not certified as an electronic security detector.

A magnetic switch built into the module can monitor whether the door / window is open or closed - it does not detect burglary. In addition, the module has an optional function that can unlock automatically in the event of a fire alarm from a detector. Remember to check if the door / window is suitable for the unit before installation.

The module is addressable and takes up a space in the control panel.

Please note that it only works with firmware 18 and F-link 1.4.0 or later and is only used for the JABLOTON 100 system.

JA-152M is a wireless "invisible" magnetic switch that tells about opening either door or window. The magnet is mounted in the window / door and the transmitter in the frame. This means that you have an invisible / discreet installation. The magnetic switch fits the EURO standard windows.

Technical specifications

JA-182M is a wireless and almost invisible magnetic contact, which tells you if something (door or window) opens. The almost "invisible" magnet is mounted in the window / door, and the transmitter is mounted in the frame. This gives you a discreet installation. The magnetic switch fits in the EURO standard windows.

Technical specifications