Jablotron detektorer

The JA-150P is a wireless PIR detector from Jablotron that detects movement indoors in a building. The detector covers up to 12 m at 110 °, but this can be optimized by adding alternative lenses. JS-7904 corridor lens, JS-7906 pet lens and JS-7901 curtain lens are all compatible with the detector.

If the detector is triggered, it will either start entry time or sound an alarm. There is a tamper switch built into the detector, which means that the unit cannot be opened or taken down without sounding a tamper alarm. The detector has a SMARTWATCH function, which improves the alarm reporting extends the life of the battery. In addition, the detector regularly performs tests and reports if there are problems. The device allows you to choose between two immunity levels, against false alarms.

Note that the detector is addressable and takes up a space in the control panel.

JA-151ST-A is a wireless smoke and heat detector that can detect fire hazards indoors, in a residential or office environment. In addition, it is also suitable for installation in sheds, caravans or motorhomes. However, the device is not suitable for industrial environments. You can decide for yourself what the detector should react to. You can set it to detect smoke AND heat, smoke OR heat, ONLY smoke or ONLY heat.

The device itself is a 2-way component, consisting of two different detectors, a heat detector and an optical smoke detector that detects changes in light reflection in its smoke chamber. The device warns locally and also sends a message to the alarm center. The siren sound has the ability to also activate other JA-151ST-A or JA-111ST-A devices in the installation.

Technical specifications

JA-112P BUS PIR is a detector from Jablotron that detects movement indoors and covers up to 12 m at 90 °.

It can be mounted in the corner of the room or on the wall, as usual, but in addition you also have the option of installing it at a special angle or from the ceiling with the JA-191PL bracket. Pga. the detector's design is suitable for environments where aesthetics are important.

It has a number of smart features. First, the detector has improved alarm reporting and longer battery life due to the device's SMARTWATCH function. In addition, it has pulse function, the ability to choose between two levels of false alarm immunity and can be used to control PG outputs. Its white light immunity is standard (6,000 lux)

Technical specifications

JA-120PC (90) is a BUS PHOTOPIR detector from Jablotron, with a coverage of 90 ° / 12m. It can detect human movement, in building or premises, and confirm alarm with a picture, taken in colors. In addition, the detector can also take a picture in the event that a PG output is activated, ie in the event of water damage or fire.

Note that the detector is only compatible with F-Link 1.5.1 or later.

Technical specifications

The JA-160PC (90) is used to detect human movement in a room and have it confirmed with an image.
In case of alarm, the camera takes pictures in color, with a coverage of 90 ° / 12m. The image is taken in color and taken twice first in low (320x240 pixels), and then in high resolution (640 × 480 pixels). The camera can also take pictures in the dark, as it is equipped with flash. Once the pictures are taken, they are saved on the camera's internal micro SD card, and afterwards the image, low resolution, is sent on to the control panel.

The pictures can be seen in the event log, by using F-link or J-link. However, they are displayed in low resolution. If you want to see the image in higher resolution, it can be found under "details." It is also possible to send the images on from the exchange, to an external server, user or KC. It is also possible to send a picture from the MyJablotron website.

In addition, the detector can also take a picture when activating a PG output, due to fire, water damage or the like.

The detector can also be set up to take a pre-alarm picture, whereby a picture is sent at input time or if only one alarm has gone off.

It is possible to set the camera's immunity to false alarms on two levels. Either you can choose fast reaction time and basic immunity, otherwise you can choose a slower reaction time but with a higher degree of immunity.

Technical specifications

JA-180W is a wireless combined PIR and microwave detector, which is intended for places that may be problematic for a normal PIR detector. It can, for example, be a place with frequent temperature changes, air heating or the like. When the PIR detector is activated, MW is also activated, which scans the area to confirm movement in the area. If it turns out that there are people in the area, the alarm is confirmed and a signal goes on to the JA-100 control panel. If you want, you can easily optimize the detector with alternative lenses, as it is compatible with Jablotron's JS-7904 corridor lens, JS-7906 pet lens and JS-7901 curtain lens.

The detector is addressable and takes up a space in the control panel.

Technical specifications

The JA-150M is a wireless magnetic switch / universal detector used for doors and windows and has two zones.

When the magnet is removed from the transmitter, the detector is activated, which either starts an alarm or activates the entry time. The magnet can be placed on either the right or left side. There is a tamper switch built into the detector that gives an alarm if someone tries to remove or open the device. The detector also works in interaction with other external devices (NO / NC), it can e.g. be a water damage detector or a key box.

Note that the detector occupies two slots in the system by default, unless zone 2 is not to be used, whereby it can be deleted in F-Link.

JA-110P 110 ° / 12 m is a BUS detector that is activated by human body heat. Jablotron lenses: JS-7904, JS-7906 and JS-7901, are compatible with the device and can be used if you want to optimize the detection.

It is possible to choose between two levels of immunity to false alarms. In addition, the device has SMARTMEMORY, an optional feature that provides LED indication of activated detector.

Technical specifications

JA-159P is specially designed to be located outdoors. The detector has two built-in PIR elements, both of which must be activated simultaneously to sound the alarm, ie what is called double activation. The double activation ensures a high degree of immunity to false alarms, which is important in an outdoor environment where disturbing elements can occur, such as small animals. The detector is from Optex, but its transmitter is developed by Jablotron. The detector must use two CR123 batteries. In addition, it has both anti-mask function and has anti-tamper alarm built-in. Anti-mask, in case something tries to cover the detector, and anti-sabotage ensures that the detector cannot be taken down or opened without sending a tamper alert. In addition, the detector performs continuous tests, and notifies if something is wrong.

If you want to increase the range, it is possible with Jablotron's 3-pin external antenna.

Note that the module is addressable and takes up one space in the control panel.

JA-111ST-A detects fire hazard indoors. It can be used both for residential and commercial purposes. In addition, it is possible to install it in caravans, motorhomes and caravans. However, it is not applicable in industrial environments. The detector is made to also be able to activate other JA-151ST-A or JA-111ST-A detectors in the installation, and then it also acts as a siren for the alarm. It can also operate independently, in case of lost connection, as long as it is equipped with backup batteries. The unit can be set to detect smoke AND heat, smoke OR heat, ONLY smoke or ONLY heat. This is possible because it consists of two individual detectors. A heat detector and an optical smoke detector - which detect a change in light reflection in its built-in smoke chamber. It also has a built-in light sensor that can be used for test signal. The unit sends both a signal to the alarm center and warns locally.

Note that the detector takes up one space in the system.

JA-120PC is a BUS PHOTOPIR detector from Jablotron. It can detect human movement, in building or premises, and confirm alarm with a picture, taken in colors. In addition, the detector can also take a picture in the event that a PG output is activated, ie in the event of water damage or fire.

The image is taken first in low resolution (320x240 pixels) and then in high resolution (640 × 480 pixels). If it is dark, the camera uses the built-in flash. The images are stored on the detector's internal micro SD card and the low-resolution image is then sent on to the control panel. From here it can be forwarded to an external server, user or KC.

If you want to see the pictures, F-Link or J-Link can be used. They can be found in the event log in low resolution, but if you click on details you can find the image in higher resolution.
In addition, you also have the option of having the image sent to you directly from MyJablotron web self-service.

The detector can also be set up to take a pre-alarm picture, whereby it can send a picture either at input time or while only one alarm has gone off.

Immunity to false alarms can be set to two levels. Either rapid reaction + basic immunity, or slower reaction + higher immunity.

Technical specifications

JA-112P (G) BUS PIR is a detector from Jablotron that detects movement indoors and which covers up to 12 m at 90 °. This version has a gray lens that reduces the risk of false alarms caused by white light from cars, reflective surfaces, sun rays and more.

Technical specifications

JA-122PW (G) is a combined PIR and microwave detector, in gray. The device is bus-based and is part of the JABLOTRON 100+ series. It can detect human movement inside and has a high degree of immunity to false alarms, due to the combination of microwave detection and PIR. In order for it to sound the alarm, the PIR activation must first be confirmed by the microwave detection. The gray lens that the detector is equipped with increases immunity to white light (up to 10,000 lux), which is far above the standard requirements. This thus lowers the risk of false alarms further, as things like car headlights and reflective surfaces do not interfere. You can choose between two levels of immunity, PIR and MW. The device takes up one space in the system, and also has a pulse response.

The JA-122PW is a combined PIR and microwave detector. The device is bus-based and is part of the JABLOTRON 100+ series. It can detect human movement inside and has a high degree of immunity to false alarms, due to the combination of microwave detection and PIR. In order for it to sound the alarm, the PIR activation must first be confirmed by the microwave detection. The gray lens that the detector is equipped with increases immunity to white light (up to 10,000 lux), which is far above the standard requirements. This thus lowers the risk of false alarms further, as things like car headlights and reflective surfaces do not interfere. You can choose between two levels of immunity, PIR and MW. The device takes up one space in the system, and also has a pulse response.

Technical specifications

JA-120PB is a BUS detector from Jablotron, with combined PIR and acoustic glass breakage. PIR sensor detects movement, while GBS sensor (glass breakage) analyzes changes in sound and air pressure. If desired, the detector can be optimized with alternative lenses from Jablotron: JS-7904, JS-7906 or JS-7901.

The detector must be registered in two consecutive zones in the system.

Technical specifications

JA-115P is a BUS-based 360 ° PIR ceiling detector. It can detect movement indoors and is different from the other motion detectors of the JABLOTRON 100 series, due to its increased immunity to pets and its modified detection characteristics. The unit is made for installation in the ceiling and has, when installed 3.5 m above the floor, 360 ° coverage with up to 5.5 m radius. It is possible to choose between two levels of detection sensitivity, depending on how high immunity to false alarms you want. In addition, the detector has a pulse response.

If it is not possible to hide the cable in the ceiling, you can use the PLV-P-ST mounting plate, for the same purpose.

The device takes up one space in the system.