Hikvision DS-2CD2386G2H-IS2U/SL 8MP AcuSense with microphone and speaker
Intelligent camera with lots of great features
- 8 megapixel image sensor delivering a sharp daytime image
- Minimum illumination of 0.0008 lux, which makes it perform well in low light
- Invisible IR light with up to 30 meters range for a great night image
- AcuSense enables the camera to detect people & vehicles
- Strobe can flash as a warning light & speaker can emit siren sound or voice messages
- Two microphones for good audio and the ability to record sound and listen to sound in live view
- Suitable for outdoor use, as it requires very little cleaning
Get push notifications on your mobile - and access to video directly from your smartphone or from PC/tablet.
| Technical specifications | |
| Model | DS-2CD2386G2H-IS2U/SL |
| Image sensor | 1/1.8" Progressive Scan CMOS |
| Maximum resolution | 8 MP (3840 × 2160) |
| Lens | Fixed focal lens, 2.8 mm or 4 mm |
| Viewing angle (H) | 2.8 mm: 105° • 4 mm: 90° |
| Minimum illumination | Colour: 0.0008 Lux @ F1.0 (AGC ON), 0 Lux with IR |
| IR range | Up to 30 m with Smart IR |
| Wide Dynamic Range | 120 dB WDR |
| Video compression | H.265+, H.265, H.264+, H.264, MJPEG |
| Maximum frame rate | 4K at 25 fps (50 Hz) / 24 fps (60 Hz) |
| Audio | Built-in dual microphones, built-in speaker, two-way audio, audio input/output |
| Active deterrence | Built-in white strobe light and audible warning |
| AI functions | AcuSense human & vehicle classification, face capture, line crossing, intrusion, region entrance/exit detection, scene change detection |
| Storage | MicroSD/microSDHC/microSDXC card slot, supports up to 512 GB |
| Network | 1 × RJ45 10/100 Mbps Ethernet, ONVIF Profile S/G/T, ISAPI, SDK |
| Alarm interface | 1 alarm input, 1 alarm output |
| Power supply | 12 VDC or PoE (IEEE 802.3at, Class 4) |
| Power consumption | Max. 18 W (PoE), max. 16 W (12 VDC) |
| Protection rating | IP67 |
| Operating temperature | -30°C to 60°C |
| Material | Metal housing and cover |
| Dimensions | Ø138.3 × 115.4 mm |
| Weight | Approx. 780 g |
| Der tages forbehold for eventuelle fejl og ændringer i specifikationerne / Specifications are subject to change without notice. Errors and omissions excepted. | |
There is no reviews yet. Be the first to write us your opinion
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.
One of the coolest and smartest cameras on the market
The surveillance camera is from Hikvision’s AcuSense family, which means it is especially well suited to sending notifications to your phone about people and vehicles. The camera is extra light-sensitive, so it delivers really good images in low light.
Watch the video showing how it works
As you can see in the video below, the camera’s specialty is distinguishing between people, vehicles and uninteresting things.
About the camera
The camera comes from Hikvision’s Turret series. These are cameras that are very robust and require very little maintenance. It is made of metal and is very rugged, making it vandal-resistant. The camera is IP67 approved, which means it can withstand harsh weather and can be used both indoors and outdoors.
The camera has 3-axis adjustment, so it is very easy to install, as it can be mounted on vertical, horizontal and angled surfaces.
People and vehicle detection (AcuSense)
Even though the camera is intelligent, it still needs some input from you. Once the camera is installed, you can choose between several types of "smart events", including "Intrusion detection", where a box is drawn in the image and when a target moves into the box and stays longer than you have allowed (1-10 seconds), your "reaction" is triggered.
There is also line crossing, which detects whether a "target" moves across the line you have drawn. This can work in both directions or only one. It can, for example, be used on one-way roads so an alarm is triggered if someone drives the wrong way, or in a driveway so you only get notified when people arrive, but not when they leave.
What is a reaction? The event triggered when a rule is violated is called a "reaction". Depending on the model chosen, there are different options.
Most commonly used "reactions":
- Push notification on mobile (have an image sent directly to your phone of the target that broke the rule, with a link to direct playback in the app)
- Send email (this function should be used with caution, as the email provider may close your account on suspicion of spamming if too many images are sent)
- Flash white light
- Warning sound (siren or voice warning - there is also the option to record your own messages)*
- Alarm output (open a garage door, switch on lights, send a signal to your alarm system, interact with IHC, etc.)
To have all features, choose the models where the model number ends in IS2U/SL
Which AcuSense cameras can do what?
The model name tells you which features the camera has, if it ends with:
- DS-2CDXXX6G2H-I = Standard with infrared night vision
- DS-2CDXXX6G2H-IU= With infrared night vision and one microphone
- DS-2CDXXX6G2H-ISU = With infrared night vision, one microphone, alarm input and output
- DS-2CDXXX6G2H-IS2U/SL = With infrared night vision, dual microphone, alarm input and output, plus white strobe light and speaker
IP67 approved
The camera is IP67 rated. This means it can withstand wind and weather. The camera can be used both indoors and outdoors.
- Dust-tight (6): Full protection against dust.
- Waterproof against immersion (7): Can withstand temporary immersion in water up to 1 meter deep for up to 30 minutes.
Supports micro-SD card
The camera can take a micro-SD card up to 512GB
(SD card (memory card not included, but can be purchased here).
About the lens
The camera is available with several lenses, and the lens affects the "FOV" (Field Of View), or in Danish: viewing angle.
A 2.8 mm lens gives a horizontal FOV of 105°, vertical FOV of 56° and diagonal FOV of 130°
A 4 mm lens gives a horizontal FOV of 90°, vertical FOV of 47° and diagonal FOV of 111°
Installation
The camera is very easy to install and can be mounted directly on a wall or on a ceiling/eave. A back box/bracket may be necessary if the connection cannot be placed behind the wall, ceiling or eave.
Under accessories, you can see which brackets fit.
Den professionelle måde at levere strøm, til et PoE-kamera, er gennem netværkskablet.
På den måde behøver man kun at trække et enkelt kabel til hvert kamera - og skal ikke døje med 230V og små strømforsyninger.
Strømmen til kameraet leveres gennem netværkskablet fra enten...
- en optager med indbygget PoE, også kaldet NVR. Et typisk valg for installationer op til og med 8 kameraer.
- en PoE-switch. Populært fortalt en fordelerdåse til netværkskabler. Det typiske valg på store installationer eller hvis man ønsker fleksibel kabelføring.
- en PoE-injector. Kan kun levere strøm til et kamera.
Af samme grund følger der ikke strømforsyning med PoE-kameraer. Du kan bestille en klassisk strømforsyning her, hvis du ikke ønsker at benytte PoE.