Dahua PFS3110-8ET-96 8-port PoE switch with 90W PoE, PoE watchdog and PoE up to 250 m
Dahua 8-port PoE switch with high PoE power, automatic camera restart and long PoE range
- 8 PoE ports for connecting surveillance cameras.
- Two ports can deliver up to 90 W PoE for power-hungry devices.
- PoE watchdog automatically restarts cameras on network errors.
- PoE transmission up to 250 meters with long-distance function.
- 1 gigabit uplink port and 1 SFP port for network connection.
- Intelligent PoE management that monitors power consumption.
- Can be used in temperatures from −30 °C to +65 °C.
Switches like this are typically used in surveillance installations where cameras need both power and network over the same network cable.
| Datasheet |
| PFS3110-8ET-96 | |
| Hardware | |
| Data Transmission Port | Port 1–8: 8 × RJ-45 10/100 Mbps (PoE) Port 9: 1 × RJ-45 10/100/1000 Mbps (uplink) Port 10: 1 × SFP 1000 Mbps (uplink) |
| Power Supply | 48 V–57 V DC |
| Operaing Temperature | –30 °C to +65 °C (-22 °F to +149 °F) |
| Operating Humidity | 5% – 95% (RH) |
| Power Consumption | Idling: 3 W Full load: 96 W |
| Performance | |
| Capacity | 7.6 Gbps |
| Packet Forwarding Rate | 4.17 Mbps |
| Packet Buffer Memory | 1 Mbit |
| MAC Table Size | 8K |
| Communication Standard | IEEE802.3/IEEE802.3u/IEEE802.3X/IEEE 802.3ab/IEEE 802.3z |
| PoE | |
| PoE Standard | IEEE802.3af/ IEEE802.3at/ Hi-PoE/ IEEE802.3bt |
| PoE Power | Port 1-2 ≤ 90 W, Port 3-8 ≤ 30W, total≤ 96 W |
| Power Consumption Management | Yes |
| PoE Pin Assignment | 1, 2, 4, 5 (V+), 3, 6, 7, 8 (V-) |
| Long Distance PoE | 250 m (820.21 ft) long distance PoE transmission |
| General | |
| Lightning Protection | Air discharge: 8 kV Contact discharge: 6 kV |
| ESD Protection | Common mode: 4 kV Differential mode: 2 kV |
| Net Weight | 0.54 kg (1.03 lb) |
| Product Dimensions | 150 mm × 100 mm × 30 mm (7.48" × 3.94" × 1.18") |
| Transmission Performance | ||
| Switch power supply voltage 53V. CAT5E/CAT6. Max. DC resistance < 10Ω/100m | ||
| Cable(m) | Load Capacity(W) | Bandwidth(Mbps) |
| IEEE802.3bt 90W | ||
| 100 | 71.3 | 100 |
| 150 | 62 | 10 |
| 200 | 51 | 10 |
| 250 | 40 | 10 |
| Hi-PoE 60W | ||
| 100 | 53 | 100 |
| 150 | 50 | 10 |
| 200 | 47 | 10 |
| 250 | 37 | 10 |
| IEEE802.3at 30W | ||
| 100 | 25.5 | 100 |
| 150 | 25.5 | 10 |
| 200 | 25.5 | 10 |
| 250 | 25.5 | 10 |
There is no reviews yet. Be the first to write us your opinion
PoE switch for surveillance cameras
DH-PFS3110-8ET-96 is a PoE switch from Dahua that makes it easy to connect multiple cameras to your network. The switch's PoE ports deliver both power and data over a single network cable, which simplifies installation and reduces the need for separate power supplies at each camera.
The switch is suitable for both small and medium surveillance installations where several cameras need to be connected to the same recorder or network.
8 PoE ports for cameras
The switch's eight PoE ports allow you to connect up to eight cameras directly to the switch. Each camera receives both power and network connection via the same cable.
This makes installation more manageable and helps you gather multiple cameras in one place in the setup.
90 W PoE for higher-power equipment
The first two ports can deliver up to 90 watts PoE. That lets you connect devices that require more power than standard cameras.
For example, this can be PTZ cameras or other units with extra features that have higher power consumption.
PoE watchdog
The switch's PoE watchdog function monitors the connection to the connected cameras. If a camera stops responding, the switch can automatically restart the power to that port.
That helps restore the connection without you having to manually reboot the camera.
Long-distance PoE
The switch's long-distance function makes it possible to send power and network up to 250 meters over a standard network cable.
At long distances the network speed is reduced, but it allows you to install cameras further away than standard network ranges permit.
Gigabit uplink and SFP port
The switch's gigabit uplink port is used to connect the switch to the recorder or the rest of the network. The extra SFP port allows you to use a fiber connection.
This can be an advantage in installations where there are longer distances between network equipment or between buildings.
Intelligent PoE power management
The switch's intelligent PoE management monitors the power consumption of connected devices. If the power draw becomes too high, the switch prioritizes the most important ports first.
That helps keep the system stable and reduces the risk of all cameras losing power at the same time.
Temperature and environment
The switch's design allows it to be used in temperatures from −30 °C to +65 °C. That makes this model suitable for installations in environments with larger temperature variations.
It can therefore be used in equipment cabinets, small server rooms, or installations where the equipment must handle varying temperatures.
Technical key points
- PoE ports: 8 × 10/100 Mbps
- 90 W PoE ports: port 1–2
- Uplink port: 1 × gigabit RJ45
- Fiber port: 1 × SFP
- PoE standard: IEEE802.3af, IEEE802.3at, Hi-PoE, IEEE802.3bt
- Max. total PoE power: 96 W
- PoE watchdog: Yes
- Long distance PoE: up to 250 m
- Switch capacity: 7.6 Gbps
- Power supply: 48–57 V DC
- Operating temperature: −30 °C to +65 °C
- Dimensions: 150 × 100 × 42 mm
- Weight: approx. 0.54 kg
