Uniview thermal and optical bullet 10mm mic/spk/strobe

Thermal and optical camera in one unit

The camera contains both a conventional 4MP camera and a thermal sensor.

The optical camera shows the surroundings like a regular surveillance camera, while the thermal sensor detects differences in heat.

That gives you two different image types, which can be shown separately or simultaneously using a picture-in-picture function.

Temperature measurement and monitoring of heat build-up

The thermal sensor can measure temperatures of objects and areas.

The camera can detect temperatures from -20°C to 150°C or from 100°C to 550°C depending on the selected measurement profile.

That makes the camera suitable for monitoring technical installations, electrical panels, machines, production equipment, storage areas and other places where abnormal heat build-up can be critical.

Automatic fire detection

The camera supports automatic fire detection and can monitor defined areas for temperature changes.

If the temperature exceeds set thresholds, the camera can trigger alarms, notifications or other actions.

It can provide earlier warning than traditional surveillance cameras because heat build-up is detected directly.

Detection of hot and cold areas

The camera can automatically identify the hottest and coldest areas in the image.

This makes it easier to spot anomalies that may indicate faults, overheating or abnormal conditions.

The feature can be used for both security and technical monitoring.

Smoke detection as additional verification

The optical camera supports smoke detection.

This can serve as extra verification of a possible fire event, where both temperature rise and visible smoke are detected.

It can reduce false alarms and provide faster clarification of incidents.

Intelligent analysis of people and vehicles

Both the thermal and optical channels support intelligent analytics.

You can set up rules for line crossing, intrusion, entry into an area and exit from an area.

The camera can distinguish between people and vehicles, which reduces unwanted events compared to standard motion detection.

Thermal detection in total darkness

The thermal sensor is independent of visible light.

That means people, vehicles and hot objects can still be detected in total darkness, fog, smoke or difficult lighting conditions.

This makes the technology especially relevant for perimeter surveillance, critical infrastructure and areas with high security requirements.

Built-in audio and warning lights

The camera is equipped with a microphone, speaker and built-in red and blue warning lights.

This allows combining detection with visible and audible alerts.

In an incident, the camera can therefore detect, document and respond.

Supports SD card

The camera supports microSD cards up to 512 GB and can therefore be used without a recorder.

Recordings can be stored directly on the camera and accessed via app or computer.

However, we generally recommend using a recorder with the camera. A recorder offers longer storage, centralized management of multiple cameras and easier searching in recordings.

PoE makes installation easier

The camera supports PoE, which means power and data can be sent over the same network cable.

This reduces the need for a separate power source at the camera's location.

Outdoor use year-round

With an IP67 rating, the camera is protected against dust, rain and moisture.

It can be used in demanding environments with temperatures from -40°C to 70°C.

Accessories and mounting

Under the Accessories tab on the product page you can see junction boxes, wall mounts and pole mounts that fit the camera.

Key technical points

• Bi-spectrum camera with thermal and optical sensor
• 4MP optical camera, 2688 × 1520
• Thermal resolution 256 × 192
• 8 mm optical lens
• 10 mm thermal lens
• Temperature measurement from -20°C to 550°C
• Automatic fire detection
• Detection of hot and cold areas
• Smoke detection
• Person and vehicle classification
• Line crossing and intrusion detection
• Built-in microphone and speaker
• Built-in red and blue warning lights
• Alarm 2 in / 2 out
• Audio 1 in / 1 out
• RS485 interface
• microSD up to 512 GB
• PoE (IEEE 802.3af)
• IP67 rated
• Operating temperature from -40°C to 70°C

Power over Ethernet

Do like the professionals. POE means that only one cable is needed for the camera. The camera gets power through the network cable, typically from a recorder with built-in PoE, or from a POE switch.

ONVIF full member

Univiews cameras and recorders support the ONVIF protocol. This means that they can be mixed with equipment from other brands as long as they also support ONVIF.

Alarm in/out

Start shooting when the alarm goes or a door is opened - and use the image analyzes to control your Philips Hue or open a port.
Alarm in and out allows you to connect cameras and recorders to other equipment.

ANR

Avoid losing recordings with AutomaticNetwork R eplenishment.
If there are network problems, the camera stores the recordings on an SD- card - and then sends them to the recorder when the connection is stable again.

Smart Intrusion Prevention

The camera is constantly analyzing the image and spots people and vehicles in the area you set the camera to protect.