Uniview thermal and optical bullet 3mm mic/spk/strobe

Thermal and optical monitoring in one camera

The camera includes both an optical 4MP module and a thermal module.

The optical part shows the scene like a regular surveillance camera, while the thermal part records temperature differences in the image.

This gives you two different types of information in a single solution, which is especially useful for fire monitoring, technical installations, storage areas, production environments and perimeter surveillance.

Wider field of view for shorter distances

This model features a 4 mm optical lens and a 3.2 mm thermal lens.

That provides a wider field of view than models with a longer lens, making the camera suitable for areas where you want more coverage close to the camera.

Examples include courtyards, storage yards, waste areas, plant rooms, smaller production areas or outdoor zones where the camera should cover a wider area.

Temperature measurement and heat monitoring

The thermal sensor can measure temperatures and detect heat development in selected zones.

The camera can operate with temperature ranges from -20°C to 150°C or from 100°C to 550°C depending on the setup.

This makes the camera suitable for monitoring areas where abnormal heat may indicate faults, overloads or an incipient fire.

Automatic fire detection

The camera supports automatic fire detection via the thermal sensor.

If the camera detects a temperature increase that exceeds the configured thresholds, it can trigger an alarm, activate a relay output or forward events to the system.

It can provide earlier warning than regular cameras because it responds to heat and not just visible flames.

Highlighting hot and cold areas

The camera can automatically mark hot and cold areas in the image.

This makes it easier to see where temperature deviates from normal.

The feature can be used for both fire prevention and technical monitoring when you want an overview of abnormal heat development.

Smoke detection as an extra check

The optical camera module supports smoke detection.

It can be used as an extra check for possible fire incidents, where both heat development and visible smoke contribute to the assessment.

This can provide a more accurate evaluation of the event and reduce the risk of irrelevant alarms.

Intelligent people and vehicle analytics

The camera supports intelligent analytics on both the thermal and optical channels.

You can set rules like line crossing, intrusion, entry to area and exit from area.

The camera can distinguish between people and vehicles, giving you more relevant events and fewer unnecessary detections.

Thermal detection in darkness and difficult conditions

The thermal sensor does not depend on visible light.

That means the camera can detect warm objects, people and vehicles in darkness, smoke, fog or other challenging conditions.

Thermal monitoring is therefore relevant in areas where regular cameras struggle to deliver a useful image.

Built-in audio and warning lights

The camera has a built-in microphone, speaker and red/blue warning lights.

This means the camera can not only detect an event but also respond with visible and audible alarms.

That can be useful for fire alarms, perimeter incidents or other situations where you want a clear local response.

Alarm inputs and outputs

The camera has 2 alarm inputs and 2 alarm outputs.

This allows the camera to be connected with external systems such as sensors, alarms, relays, sirens or other control equipment.

The camera can both receive signals from other devices and send signals when an event is detected.

Can be used with or without an NVR

The camera supports microSD cards up to 512 GB and can therefore store recordings locally.

We generally recommend using an NVR with the camera. An NVR gives longer retention, centralized management of multiple cameras and easier searching in recordings.

An SD card can also serve as extra backup if the connection to the recorder is temporarily interrupted.

PoE makes installation easier

The camera supports PoE, which means power and data can be sent over the same network cable.

That reduces the need for a separate power supply at the camera and simplifies installation.

Outdoor use all year round

The camera is IP67 rated and protected against dust, rain and moisture.

It can operate in temperatures from -40°C to 70°C, making it suitable for both indoor and outdoor installations in demanding environments.

Accessories and mounting

Under the accessories tab on the product page you can find junction boxes, pole mounts and cable glands that fit the camera.

Key technical points

• Bi-spectrum camera with thermal and optical sensor
• 4MP optical camera, 2688 × 1520
• Thermal resolution 256 × 192
• 4 mm optical lens
• 3.2 mm thermal lens
• Optical field of view 74.9°
• Thermal field of view 58.0°
• IR range up to 40 meters
• Temperature measurement from -20°C to 550°C
• Temperature accuracy ±8°C or ±8%
• Fire detection up to 13 meters for a 0.1 × 0.1 m fire source
• Temperature detection up to 8 meters for a 0.1 × 0.1 m area
• Thermal person detection up to 30 meters
• Thermal vehicle detection up to 60 meters
• Smoke detection
• Person and vehicle classification
• Built-in microphone and speaker
• Built-in red and blue warning lights
• Alarm 2 in / 2 out
• Audio 1 in / 1 out
• RS485 interface
• MicroSD up to 512 GB
• Ultra 265, H.265, H.264 and MJPEG
• PoE, IEEE 802.3af
• IP67 rated
• Operating temperature from -40°C to 70°C
• Max. power consumption 12W

Power over Ethernet

Do like the professionals. POE means that only one cable is needed for the camera. The camera gets power through the network cable, typically from a recorder with built-in PoE, or from a POE switch.

ONVIF full member

Univiews cameras and recorders support the ONVIF protocol. This means that they can be mixed with equipment from other brands as long as they also support ONVIF.

Alarm in/out

Start shooting when the alarm goes or a door is opened - and use the image analyzes to control your Philips Hue or open a port.
Alarm in and out allows you to connect cameras and recorders to other equipment.

ANR

Avoid losing recordings with AutomaticNetwork R eplenishment.
If there are network problems, the camera stores the recordings on an SD- card - and then sends them to the recorder when the connection is stable again.

Smart Intrusion Prevention

The camera is constantly analyzing the image and spots people and vehicles in the area you set the camera to protect.