Switch for surveillance

16 ports Gb-switch til videoovervågning og access-points

• 16+2+1 PoE-porte til kameraer, 2 uplink-porte til videre forbindelser og 1 SFP port til fiber
• 3 modes: Normal, Secure og Surveillance
• op til 30 watt pr. port, kan drive selv mange små PTZ kamera (225 watt totalbudget)
• up til 250 meters PoE i surveillance-mode
• kan monteres i racks, beslag medfølger.
• aktiv køling
• metalhus

Fordi switchen er Gb en gigabit-switch, så har den den båndbredde der skal til, for at kunne samle datastrømme fra andre switche eller fra trådløse acces-points (WIFI-noder).

Hikvision's smart managed * switches are ideal for video surveillance, as they provide power to all types of Active PoE devices, including brands other than Hikvsion. However, if you use it for Hikvision's own products, you get an extra advantage, namely the advantage of their "extend" technology. PoE extend means that you can connect devices up to 300 meters away from the switch, where conventional switches can reach a maximum of 70 meters with PoE.

The switch can supply up to 30 watts on each port - but the total PoE power consumption must not exceed 370 watts. For example, a PTZ like this DS-2DE4225IW-DE uses a maximum of 18 watts, leaving 362 watts for the remaining ports / cameras. For reference, a camera like this DS-2CD2346G2-IU uses approx. 7 watts.

The switch can take SFP modules, for fiber connection:

* Managed switches mean that you can manage the switch, ie you can configure it for VLAN, priorities etc. Switches like this are recommended for users with a deeper knowledge of networks and with a specific need to configure the switch. Of course, the DS-3E1326P-EI can also be "just" set to out-of-the-box, like a regular switch.

Watch a video about Hikvision smart switch here (English): https://www.youtube.com/watch?v=wU-bqihJdbo

24+2+1 ports Uniview switch til de store installationer

• 24 PoE-porte til kameraer, 2 uplink-porte til videre forbindelser og en SFP port til fiber mm.
• 100 megabit porte til kameraer og 1000 megabit porte til up- og downlink
• 3 modes: Normal, Secure og Surveillance
• op til 30 watt pr. port, kan drive selv mange små PTZ kamera (370 watt totalbudget)
• up til 250 meters PoE i surveillance-mode
• kan monteres i racks, beslag medfølger.
• metalhus

Switch with 10 ports, 8 of which are PoE ports

• Multiple operating modes: Standard (Normal mode), EXTEND (Monitoring mode)
• Supports port traffic management
• Up to 250m transmission distance in Extend mode
• Supports buffer optimization
• Full metal housing, safe and reliable

A really solid PoE switch from Uniview. Ideal for video surveillance.

Powerful 28-port Gigabit PoE Switch for Professional Surveillance

• 20 Gigabit PoE ports, four Hi-PoE ports (90W), and four uplink ports.
• Four different modes: standard, extend, isolation, and PoE-watchdog.
• Range of up to 300 meters on selected ports.
• Overvoltage protection on all PoE ports.
• Large 370W PoE budget for demanding devices.
• Durable metal enclosure for rack mounting.
• Easy installation – no configuration needed.

Fast and reliable network connection for your surveillance system with options for both standard and long-distance setups.

Extra kraftig 24 ports gigabit switch

• Support IEEE802.3 at standard, compatible with IEEE802.3 af by electrical equipment (PD)
• Undestøtter PoE op til 30W pr port (samlet op til 370W)
• Auto detect. Registrerer sel om udstyret skal bruge PoE, og fungerer derfor fint med udstyr som ikke benytter PoE
• Understøtter prioriteret forsyning, og garanterer derfor strøm til prioriterede enheder 
• Understøtter IEEE802.3 x full duplex flow control og Backpressure half duplex flow control;
• Line-speed forwarding, intelligent identifikation
• Rackbeslag medfølger

Switchen er velegnet til både kameraer og trådløse access points på grund af sin høje båndbredde

This switch is designed to power up to 4 PoE products, such as cameras - however with a maximum of 15.4 watts on each port, which in short means that it can drive 4 pcs. ordinary cameras, but if you need a PTZ camera or larger cameras with a power consumption of more than 15.4 watts, we recommend us ...more

MicroOptics SFP transceiver module

• Transceiver module - GigE
• 1 Gbps
• 550m

Hikvision's smart managed * switches are ideal for video surveillance, as they provide power to all types of Active PoE devices, including brands other than Hikvsion. However, if you use it for Hikvision's own products, you get an extra advantage, namely the advantage of their "extend" technology. PoE extend means that you can connect devices up to 300 meters away from the switch, where conventional switches can reach a maximum of 70 meters with PoE.

The switch can deliver up to 30 watts on each port - but the total PoE power consumption must not exceed 370 watts. For example, a PTZ like this DS-2DE4225IW-DE uses a maximum of 18 watts, leaving 362 watts for the remaining ports / cameras. For reference, a camera like this DS-2CD2346G2-IU uses approx. 7 watts.

The switch can take SFP modules, for fiber connection:

* Managed switches mean that you can manage the switch, ie you can configure it for VLAN, priorities etc. Switches like this are recommended for users with a deeper knowledge of networks and with a specific need to configure the switch. Of course, the DS-3E1318P-EI can also be "just" set to out-of-the-box, like a regular switch.

Watch a video about Hikvision smart switch here (English): https://www.youtube.com/watch?v=wU-bqihJdbo

Versatile PoE switch supplied with 12v. and delivers 4 x PoE

• Suitable for mobile solutions, e.g. car battery
• 5 Ports, 1 for Uplink and 4 for cameras (with PoE)
• Truck battery also supported (8-40 volts DC)

Do you only have one cable - and 2-4 cameras? then here is the solution

• 802.3bt PoE++ to 802.3af/at
• Max. PoE Input 95W / Output 75W
• IP30
• Din Rail