facebook

Ajax Curtain Outdoor - Wireless outdoor curtain detector

Model: Curtain Outdoor
Availability: In stock In stock
Log in here to buy
Do you have questions about the product? +45 70701009

Ajax Curtain Outdoor - outdoor “curtain detector” with PIR, microwave and long range

  • Two PIR sensors + K-band microwave
  • Narrow 8° detection angle – ideal for entrances, fences and passages
  • Range 8–12 meters
  • Advanced anti-masking and tamper protection
  • AI-based SmartDetect for movement filtering
  • Pet-immune (up to approx. 100 cm height)
  • IP55 weather-protected – designed for outdoor use
  • Battery life up to 3 years
  • Range up to 1,700 meters to Ajax hub
  • Mountable on wall, corner or with included bracket
  • Ideal for narrow areas like passages, fences, carports and facades

The detector is perfect for areas where you want to create an “invisible wall” that reacts when someone passes through. Common uses include along buildings, at gates, walkways, narrow entrances and similar places where ordinary detectors either cover too widely or produce too many false alarms.

  • 1.999,00  Incl. VAT
    ( 1.599,20  Excl. VAT )

    ReX 2 repeater to extend the wireless signal to the devices

Technical specifications
Product type Wireless dual-technology curtain motion detector for outdoor and indoor use
Compatibility Compatible with Ajax hubs and radio signal range extenders
Communication technology Jeweller for commands, alarms, and events
Wings for firmware updates
Two-way communication
Block encryption with dynamic key
Frequency hopping against radio interference and jamming
Frequency bands 866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
905.0–926.5 MHz
915.85–926.5 MHz
921.0–922.0 MHz
Depends on sales region
Radio communication range Up to 1700 m in open space
Maximum effective radiated power Up to 20 mW
Radio signal modulation GFSK
Detection sensors 2 × PIR sensors
1 × K-band microwave sensor, 24 GHz
Motion detection distance Up to 8–12 m
Adjusted with a slider on the detector enclosure
Specified when installed at a height of 1–2.4 m
Motion detection angles Horizontal: 8°
Vertical: 85° / 75° / 15° depending on installation height
Motion detection speed 0.3 to 2.0 m/s
Sensitivity 3 levels
Adjusted in Ajax apps by a PRO or user with admin rights
Pet immunity Height: up to 100 cm
Weight: irrelevant
Requires installation at 1 m height and slider set to Pet position
False alarm prevention Dual motion detection technology
SmartDetect software algorithm
K-band microwave sensor filters false alarms caused by thermal interference
Temperature compensation for effective detection from −25 °C to +60 °C
Operating modes Regular mode
Pet immunity mode
Installation recommendations Recommended installation height: 2.4 m
Recommended installation height with Pet immunity enabled: 1 m
Designed for indoor and outdoor use
Hood is recommended to protect the anti-masking system from rain and snow
Sabotage protection Tamper alarm on removal from surface or mounting panel
Device authentication against spoofing
Anti-masking system detects attempts to block the detector view
Accelerometer alarm when the detector is moved
Holding screw for secure fastening
Communication loss detection Within 36 seconds
Detection time depends on Jeweller settings
Firmware update Over-the-air firmware updates via Wings communication technology
Mounting SmartBracket mounting panel
Angle mount
Hood
Can be fixed to a third-party mount
Power supply 2 × CR123A batteries
Pre-installed
Type C
Battery life Up to 3 years
Operating voltage 6 V nominal
Operating range 4.1–6.2 V
Current consumption Quiescent current 37 μA at nominal voltage
Maximum current 600 mA at nominal voltage
Battery capacity 1600 mAh
End-of-life battery capacity 170 mAh
Battery voltage thresholds Low battery voltage 4.48 V
Low battery recovery voltage 5.14 V
End-of-life battery voltage 4.1 V
Battery manufacturer Huiderui or Panasonic
Operating temperature From −25 °C to +60 °C
Operating humidity Up to 95%
Protection class IP55
Dimensions With hood: 155 × 77 × 85 mm
With hood and angle mount: 155 × 84 × 98 mm
Without hood: 141 × 60 × 72 mm
Without hood and with angle mount: 141 × 76 × 84 mm
Weight With hood: 299 g
Without hood: 223 g
Angle mount: 34 g
Colour White
Package contents Curtain Outdoor Jeweller
SmartBracket mounting panel
2 × CR123A batteries
Angle mount
Hood
Installation kit
Quick start guide
Warranty 24 months
Reservations are made for possible errors and changes in the specifications

There is no reviews yet. Be the first to write us your opinion

Add review:

Here you can see the compatibility between the various units and Hubs from Ajax
https://ajax.systems/tools/devices-compatibility/

Ajax outdoor curtain detector

Curtain Outdoor Jeweller is designed to create a narrow, precise and targeted security zone around a building or area. Instead of monitoring a wide field, the detector only registers movement in a thin line, making it suitable for passages, driveways, narrow sides of buildings and confined spaces. By combining two PIR sensors, a microwave radar and Ajax’s advanced software, the device achieves stable operation in environments where wind, animals, vegetation and lighting conditions normally cause problems for standard motion detectors.

 

Two PIR sensors combined with microwave radar

The detector uses two PIR elements that detect changes in heat and movement, but in outdoor environments such signals can be affected by sun-warmed surfaces, reflections or temperature fluctuations. Therefore the PIR sensors are supplemented with a 24 GHz K-band microwave transmitter that actively measures movement in the area using the Doppler effect. The microwave can distinguish between real movement and temporary disturbances, which significantly increases stability. This combined method makes the detector better suited for outdoor use than pure PIR solutions.

 

Adjustable range of 8–12 meters

The range can be set directly on the unit via a physical slider. This lets you tailor the monitored field precisely to the task at hand. If the detector should cover a narrow access path, the range can be reduced to avoid detection further out. For larger areas, for example along a fence or a building, the range can be extended to the full area up to 12 meters. This flexibility allows precise perimeter protection without affecting nearby areas.

 

Narrow 8° detection angle

The detector covers only a very narrow field of about 8° horizontally. That creates a “detection wall” that only reacts if a person passes through this slim area. This is a big advantage in environments where wider sensors would cause too many unnecessary triggers — e.g., along facades where passersby or incidental movements should not be registered, or in carports and passages where you want focus on a specific direction of movement.

 

Pet-immune up to about 100 cm height

If the detector is mounted at 1 meter height and set to Pet-mode, it ignores movements close to the ground — for example from dogs, cats and other animals up to about 100 cm tall. This reduces the risk of false alarms in gardens or areas frequented by animals. Pet-mode also adjusts the detector’s internal algorithm so it focuses more on human walking height rather than lower movements.

 

AI-based SmartDetect to reduce false alarms

SmartDetect analyses movements in multiple stages, assessing size, speed and movement patterns. The system actively tries to distinguish between people, animals, leaves, snow, branches in the wind and other types of signals that can cause issues for traditional outdoor sensors. The software adapts dynamically to the surroundings and helps maintain accuracy even in changing weather and light conditions.

 

Temperature compensation for stable operation

As temperatures fluctuate, PIR sensors’ sensitivity naturally changes. Curtain Outdoor therefore continuously compensates for temperature changes so detection remains stable from −25°C to +60°C. This means the detector can be used year-round without losing sensitivity in extreme heat or cold.

 

Advanced anti-masking

The anti-masking system constantly monitors the detector’s front. If someone tries to block the view by covering the lens with tape, spray, fabric or other materials, the system detects the change and sends an alarm. This is important in outdoor installations where an intruder might try to “neutralize” the sensor before approaching the building.

 

Tamper protection and accelerometer

The tamper switch detects if someone tries to remove the detector from its SmartBracket. Additionally, the unit includes an accelerometer that can register movements, shocks or attempts to loosen the sensor without opening the enclosure. This increases security in installations in exposed areas where sabotage attempts may occur.

 

Long wireless range — up to 1,700 meters

Curtain Outdoor communicates via Ajax’s Jeweller radio, which is optimized for low power consumption and long range. With up to 1,700 meters of communication distance in open terrain, the detector can be used on large properties, at outbuildings, around fences or in commercial areas with wide physical spread. The system automatically adjusts transmit power so the batteries last longer.

 

Frequency hopping and encrypted communication

To protect against interference and jamming, the detector automatically switches between multiple frequency channels. All data is sent with block encryption and a dynamic key, making it difficult for unauthorized parties to intercept or disrupt communication with the hub.

 

Battery operation up to approx. 3 years

Curtain Outdoor is powered by two CR123A batteries, which are included. The low power consumption and periodic data transmissions make it possible to operate for up to approximately three years, depending on environment and activity. When the battery is running low, the system notifies both users and installers.

 

IP55

The detector is rated IP55 and built to withstand rain, dust and moisture. The included hood protects the anti-masking sensors from rain and snow so the function continues to work in poor weather. This makes it suitable for installation on facades, in driveways and other outdoor locations with direct exposure.

 

Flexible mounting options

The detector can be mounted directly on a wall, in corners or using the included bracket, depending on the desired monitoring direction. Mounting height can vary between 1 and 2.4 meters depending on the intended function, and the installation can be adapted for private homes, businesses and outdoor passage areas.

 

Key technical points

  • PIR sensors: 2 pcs
  • Microwave sensor: 24 GHz K-band
  • Detection distance: 8–12 meters
  • Detection angle: 8° horizontal / 85°–75° vertical
  • Sensitivity: 3 levels
  • Pet immunity: animals up to approx. 100 cm height
  • Communication range: up to 1,700 meters
  • Radio technologies: Jeweller + Wings
  • Encryption: block encryption with dynamic key
  • Frequency hopping: yes
  • Operating temperature: −25°C to +60°C
  • Battery: 2 × CR123A
  • Battery life: up to approx. 3 years
  • Protection rating: IP55
  • Anti-masking: yes
  • Tamper switch + accelerometer: yes
  • Dimensions: up to 155 × 77 × 85 mm
  • Weight: 223–299 g (depending on hood/bracket)